Allow convenience functions
Allow shop optimisations
In order to optimise our website, we use services that collect and aggregate data and make it available to us as a statistical overview.
100% compatible with 2.5 Inch IDE drive mechanical specs
2 years warranty
The LINDY mSATA SSD to 2.5 Inch IDE Drive Adapter converts a mSATA SSD into a 7mm high 2.5 Inch IDE 150 Mbit/sec SSD. Increase your system performance by adding the speed benefits of an mSATA SSD to any 2.5 Inch IDE application.
Transparent to the operating system, the adapter doesn’t require any the installation of drivers. It reduces Data transfer bottlenecks and utilise the full potential of your IDE controller, with a potential file transfer speed of up to 150 Mbit/sec.
Additionally, the adapter helps you save money thanks to the reduced power demands of SSD over regular platter drives.
1 x mSATA SSD to 2.5 Inch IDE Drive Adapter
4 x Mounting Screws
1 x Quick installation Guide
44 pin IDE male connector
Compliant with serial ATA 2.6
Jumper setting supports IDE Master, Slave & Cable Select modes
ATA/ATAPI PIO mode data transfer
ATA/ATAPI UDMA data transfer rate of 150/133/100/66/44/33/25/16.7 Mbit/sec
ATA/ATAPI-7 streaming feature set
48bits LBA can break disk capacity limit to support mSATA SSD (max. 115, 144, 188GB)