You are here: » Homepage
The Lindy Cat.6 HDBaseT HDMI 4K60 Wall Plate Transmitter is one part of a high performance, reliable solution for extending HDMI signals over long distances via Cat.6 network cable.
By combining this Transmitter unit with a compatible HDBaseT Receiver such as Lindy No. 38214 and 38342, this solution ensures reliable transmission up to 70m.
The following distance and resolution combinations are possible when using high quality Cat.6 or above U/UTP or F/UTP cable:
70m: 1920x1080@60Hz 4:4:4 8bit
40m: 3840x2160@60Hz 4:4:4 8bit / 4:2:2 12bit
Supporting resolutions up to 4K Ultra HD, video can be viewed in stunning clarity, while additional support for HDR (High Dynamic Range) allows content to be displayed with enhanced brightness, greater contrasts of blacks and whites and a much wider colour gamut. This provides a reliable solution for creating eye-catching digital signage in retail, immersive displays at events or engaging setups in larger conference rooms or lectures halls.
PoC (Power over Cable) functionality with On/Off switch provides additional flexibility. This allows power to be supplied alongside data through Cat.6 network cable in a point to point connection between the transmitter and receiver, meaning only a single power supply is required at one side of the installation.
Featuring bi-directional IR ports at both sides of the setup, the source equipment can be easily controlled from the display side, and the display can also be controlled from the HDMI source side. This extension system allows for complete and simple control for the user providing also RS-232 port via terminal block on the rear side of the wall plate.
HDBaset is a globally recognised standard for high quality distribution of AV content and other technologies, including power and control, over longer distances via low cost Cat.6 or above cable.
HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
Please Note: the quoted lengths and resolutions are possible with a direct connection between Transmitter and Receiver using good quality Cat.6 or above cable. Using a different cable type, introducing couplers or patch panels may result in a reduction of possible distances.
The Lindy Cat.6 HDBaseT HDMI 4K60 Wall Plate Transmitter is one part of a high performance, reliable solution for extending HDMI signals over long distances via Cat.6 network cable.
By combining this Transmitter unit with a compatible HDBaseT Receiver such as Lindy No. 38214 and 38342, this solution ensures reliable transmission up to 70m.
The following distance and resolution combinations are possible when using high quality Cat.6 or above U/UTP or F/UTP cable:
70m: 1920x1080@60Hz 4:4:4 8bit
40m: 3840x2160@60Hz 4:4:4 8bit / 4:2:2 12bit
Supporting resolutions up to 4K Ultra HD, video can be viewed in stunning clarity, while additional support for HDR (High Dynamic Range) allows content to be displayed with enhanced brightness, greater contrasts of blacks and whites and a much wider colour gamut. This provides a reliable solution for creating eye-catching digital signage in retail, immersive displays at events or engaging setups in larger conference rooms or lectures halls.
PoC (Power over Cable) functionality with On/Off switch provides additional flexibility. This allows power to be supplied alongside data through Cat.6 network cable in a point to point connection between the transmitter and receiver, meaning only a single power supply is required at one side of the installation.
Featuring bi-directional IR ports at both sides of the setup, the source equipment can be easily controlled from the display side, and the display can also be controlled from the HDMI source side. This extension system allows for complete and simple control for the user providing also RS-232 port via terminal block on the rear side of the wall plate.
HDBaset is a globally recognised standard for high quality distribution of AV content and other technologies, including power and control, over longer distances via low cost Cat.6 or above cable.
HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
Please Note: LINDY Snap-in Blocks must be used in conjunction with a LINDY Single Gang Face Plates or Double Gang Face Plates as well as LINDY Keystones.
The LINDY Modular AV Faceplate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Fit this HDMI Keystone into a Keystone Snap-in Block and place into a face plate along side other Keystone and Snap-in modules.
These modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility.
Additional required products...
Please Note: The LINDY Modular AV Faceplate System must be used in conjunction with LINDY Keystone Snap-in Blocks and Faceplates. Place this Keystone into either a Single Keystone Snap-in Blocks or Dual Keystone Snap-in Blocks which come in packs of four. Then use with a Single Gang Faceplate or Double Gang Faceplate.
A utiliser avec les panneaux LINDY modulaires.
• Protects unused ports on active equipment from dust and debris
• Easy to insert and remove
• Pack of 10pcs
• Material: ABS plastic
• Colour: Black
• RoHS compliant
LINDY RJ-45 dust covers are designed to prevent dust, copper strands and other foreign objects entering the network socket.
Use in conjunction with a Single Surface Pattress Box.
This single gang face plate is designed to be used with the LINDY Modular AV Extender Wall Plate System or AV Face Plate System which are designed to extend a combination of audio and video signals over low cost Cat5e/6 cable.
Choose from a range of snap in modules, including VGA, RCA/Phono and S-Video combinations.
2 modules can be installed in this face plate. If installing a single module, a blanking plate can be used for a tidier installation.
Also available are a range of accessories including face plates, back boxes and bulk cable for a total extender solution.
The LINDY Modular AV Face Plate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Fit a Keystone Modules of your choice into this Snap-in Block and place it into a face plate along side other Keystone and Snap-in modules.
The range of modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility.
A Dual Snap-in Block is also available.
Please Note: LINDY Snap-in Blocks must be used in conjunction with a LINDY Single Gang Face Plates or Double Gang Face Plates as well as LINDY Keystones.
 |