Maximum resolution supported: 1920x1200@60Hz or 1600x1200@60Hz
The receiver delivers a MONO Audio signal (Stereo left and right channels are combined by the transmitter unit)
Gain and Peak regulation dimmers on the receiver unit to improve quality over longer distances
2 year warranty
This VGA Extender transmits VGA and audio signals through CAT5e network cables over distances of up to 300m when using high-quality solid core network cable.
Easy to install, the Extender system is made up of local transmitter and remote receiver units that are connected together with CAT5e cable (not included), high quality solid core installation cable is recommended. The local transmitter unit connects to the computer system's VGA port, with a VGA output available to connect a local monitor, while the receiver unit connects to your remote monitor or projector.
The extender includes both Gain and Skew controls to allow you to adjust the brightness and sharpness of the picture according to your requirement.
Both Extender units are housed in sturdy metal casings, making them ideally suited to use in factories and other industrial applications.
Maximum supported distances and resolutions are dependent on both the monitor and the chipset used in the graphics card.
To get the best video quality results on the longest distance a skew compensator like our item number 32766 may be required
VGA & Audio CAT5e Extender with Audio Transmitter
VGA & Audio CAT5e Extender with Audio Receiver
2x Multi-country PSU 5V ~2A (with 3.5/1.35mm DC connector)
Sends VGA signals up to 750m using OM3 LC fibre optic cable
Transmits high-resolution VGA signals up to 1920 x 1200
Supports Stereo Audio transmission
Consists of a transmitter and receiver unit
2 year warranty
The LINDY VGA & Audio Extender sends signals over two standard LC duplex fibre optic cables with no loss of quality or signal degradation from compression artefacts or electromagnetic interference. This means it is highly suited to the demanding standards required from professional signal transmission in the medical, military, and presentation industries.
Please note: This product requires 2x LC Duplex cables or 4 core LC cables in either OM2 or OM3.
This extender allows you to transmit VGA video and analogue audio up to a distance of 300m using high quality Cat.5e/6 solid core cable to 4 remote receivers (no. 35402) with monitors/projectors and speakers connected.
This extender system allows you to transmit VGA video and analogue audio up to a distance of 300m using high quality Cat.5e/6 solid core cable from the local unit (no. 35401) to 4 of these remote receivers with monitors/projectors and speakers connected.
Extend HDMI/VGA, IR, Ethernet & RS-232 over a single CAT5e/6/7 Cable when used with a compatible HDBaseT(TM) display or Receiver
Integrated HDMI/VGA switch with manual or auto switching
Video scaling for using legacy equipment in High Definition installations
Includes HDBaseT PoE functionality to remotely power compatible receivers (sold separately)
2 Year Warranty
Using HDBaseT(TM) Technology the LINDY C6 HDMI & VGA Switching Extender Transmitter allows you to send HDMI or VGA with Analogue Audio, Ethernet, RS-232, and IR signals up to 100m using a single high quality Cat.6/Cat.7 RJ45 cable to an HDBaseT Receiver or Display/Projector with integrated HDBaseT technology.
Switching between the HDMI and VGA inputs is quick and easy and can be completed by push button, IR remote control, RS-232 command or auto-switching, perfect for integration in to a meeting room, classroom or control centre.
For added convenience and to enable discreet installation of a Receiver unit the Transmitter supports 24V PoH (Power over HDBaseT) allowing a single power supply to be used with the Transmitter to power both units. For best results and especially longer distances, we recommend using solid core/structured cabling.
The integrated video scaler provides complete control over the output video resolution; allowing resolutions from 640x480 (VGA) to 1920x1200 (WUXGA), including 1080p, to be used. In addition the scaler function also allows you to control the Contrast, Brightness, Hue, Saturation and Sharpness of the output image to ensure the best possible picture quality.
HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.