• Supports bi-directional communication
• Save parallel ports for use with ZIP drives and other parallel devices
• Easy 'Plug & Play' installation
• Cable length: 1.5m
• Connectors: USB Type A Male to 36 Way Centronics Male
• Supports most printer status monitoring software
• Compatible with Windows 95(OSR2.1)/98/ME/2000/XP/Vista/7/8
• 2 year warranty

• USB Type A Male to 25 Way D Female
• For use with Parallel printers only - does not support any other parallel devices
• Supports bi-directional communication
• Compatible with USB 2.0 Full Speed and USB 1.1
• USB Printer Class Specification 1.0 compliant
• USB Bus powered, no external power supply required
• Compatible with Windows ME/2000/XP/Vista/7/8
• Cable length: 1.5m

• Premium model with improved reliability and compatibility
• With approx. 1.5m USB cable
• With D9 connector for RS-232 devices with 9 pin connector
• USB A male
• RS-232 port data rates up to 128 kbit/s, stop-bits, parity, 7/8 data bits configurable
• Compatible with USB 1.1 and 2.0 - Plug & Play
• Bus powered
• Includes CD with drivers and user manual
• Operating systems: Windows ME/2000/XP/Vista/10, MAC OS 8.6 up to 10.4

The LINDY USB RS-232 adapter allows the use of serial devices such as modems, printers and mice to the USB port of your PC or to a USB hub.

Two versions are available, with 9 or 25 pin connector. Windows and Mac OS compatible

• Simultaneously connect two RS-232 serial devices to your USB ready PC or Mac
• USB 1.1 compliant, supports all standard serial devices
• Connectors: 2 x 9 Way D Male to USB A Male, cable length 60cm
• Plug & play and USB bus powered
• Compatible with Windows ME/2000/XP/Vista/7/8/10 and Mac OS 9 or higher
• Warranty: 2 years
• Supports remote wake up and power management
• Data buffers for upstream and downstream on each port
• High Quality FTDI Chipset

• USB 1.1 interface that provides 4 separate RS-232 serial ports (4 x 9 Way D Male)
• Plug & Play and powered from the USB bus - no separate power supply required for most installations
• High Quality FTDI Chipset
• Supplied with 80cm USB Type A to B connection cable
• Compatible with Windows 98SE/ME/2000/XP/Vista/7/8/10, Mac OS 8.6

This USB to Serial Converter allows you to connect up to 4 serial devices to a single USB port.

The compact size and USB bus-powered design make it ideal for use with notebooks or as an alternative to installing an internal serial card in your desktop PC.

It supports most standard RS-232 serial devices such as modems, PDAs, barcode readers, label printers, EPOS devices etc.

• Provides connection for RS422 devices via any available USB port
• Fully compliant with USB Specification 1.1, USB 2.0 compatible
• Provides one 9 Way Male Serial Port for device connection
• Supports data transfer rates of up to 3 Mbps
• Supports Remote Wake-Up and Power Management
• Supports Hot-Swapping so you can quickly switch serial devices without shutting down your computer
• USB bus powered
• USB cable length appr. 1m
• Compatible with Windows ME/2000/XP/Vista/7/8, Mac OS 9 and higher, Linux

• Provides connection for RS-485 devices via any available USB port
• Fully compliant with USB specification 1.1, USB 2.0 compatible
• Provides one 9 Way Male serial port for device connection
• Supports data transfer rate of up to 3Mbps
• Supports Remote Wake-Up and Power Management
• Supports Hot-Swapping so you can quickly switch serial devices without shutting down your computer
• USB bus powered
• USB cable length approx. 1m
• Compatible with Windows ME/2000/XP/Vista/7/8, Mac OS 9 and higher, Linux
• 2 year warranty

• Back up, restore and transfer data from a SATA HDD/SSD
• Supports SATA up to 6Gbps
• USB 3.1 Gen 1 / USB 3.0 SuperSpeed standard with data rates up to 5Gbps
• Compatible with USB Type A equipped computers
• 2 year warranty

This Lindy USB 3.0 to SATA Converter allows users to easily connect high performance 5.25", 3.5" or 2.5" SATA drives without having to install the drive in an enclosure or computer. It is an ideal tool for computer technicians as well as for private users for quick backups.

With plug & play installation, the converter can be easily connected and used instantly.

The included mains adapter powers the connected hard drive. The USB 3.0 to SATA Converter does not directly support 3.3V HDD/SSDs; for drives which require 3.3V, please use a SATA/Micro SATA Adapter.