For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
This product has been discontinued and replaced by Part No 43160.
Standalone cloning functionality, no computer required
Full bitwise cloning including MBR and EISA partitions
Dual Bay design accepts either 2.5" or 3.5" SATA disk drives
High speed USB 2.0 and eSATA interfaces
Power supply and connection cables included
Advanced Format 3TB support
Compatible with Windows ME/2000/XP/Vista/7/8, Linux and Mac OS X
This handy Cloning Adapter is the portable alternative to a SATA Docking station. Ideal for system builders/integrators, computer technicians and IT departments it acts as an external hard drive for 2.5" and 3.5" SATA hard disks as well as a convenient cloning station. It makes bit by bit clones (including Operating System and Partitions) of source HDDs onto target HDDs making it perfect for when upgrading to larger capacity HDDs. It can also act as a standalone cloning station when not connected to a computer.
When connected to a computer the adapter allows bare HDDs up to 3TB in capacity, to be connected to a computer via eSATA (3Gbps) or USB 2.0 (480Mbps). Data recovery and backups are done without the hassle of installation. The dual SATA connector design allows two hard drives to be connected simultaneously, so that data can be copied between multiple drives of different types as 2.5" and 3.5" SATA drives are supported natively.
Supports SATA HDD capacities up to 3TB
High speed data transfer: up to 480Mbps (USB 2.0), 3Gbps (eSATA)
Connects to the computer via USB Type A or eSATA connection
USB (Dual USB A to Mini B) and eSATA cable lengths: approx. 90cm
External power adapter: 100 - 240V AC, 12V DC 2A & 5V DC 2A
Supplied with UK power supply cable, 1.2m
Notes on use
For correct operation, the target drive should be unformatted and without any partitions.
Older drives up to 10GB, and drives with older 28 Bit LBA addresses are not supported.
The clone function for SSDs and HDDs >2TB is possible in some cases. However, LINDY does NOT support this feature!
SSDs and HDDs >2TB use the new "Advanced Format" with sector size 4kB while SATA HDDs up to 1TB use 512 Byte sector size. More background information at http://en.wikipedia.org/wiki/Advanced_Format and from your HDD and SSD manufacturer!