We use third party services that help us to improve and optimize our online experience. For the use of certain services we need your prior consent which can be revoked at any time. You can find further information on data protection in our privacy policy
Details
In order to optimise our website, we use services that collect and aggregate data and make it available to us as a statistical overview.
You are here: » Homepage
This splitter cable allows two monitors to be connected to a computer's single VGA port. It's a passive cable which simply splits a single VGA signal into two without any amplification or signal regeneration, making it an ideal, cost effective solution for shorter installations.
The Lindy 3 Port Mini DP to DP MST Hub is an ideal solution for expanding or duplicating Mini DisplayPort signals across 3 DisplayPort monitors. MST hubs allow for the connection of a single Mini DP source device including computers, laptops or notebooks to 3 separate DP displays, while also providing the ability to visualise content in multiple ways. Signals can be expanded across both displays to show large scale spreadsheets, create immersive panoramic gaming experiences or eye-catching digital signage in retail. Content can also be, independently shown on either display, great for developing a productive, multi-tasking working environment, or duplicated on both displays for use in hospitality, retail or educational scenarios.
With support up to 3840x2160@60Hz 4:4:4 8bit, content can be viewed in ultra-realistic quality, ideal for applications that require a high resolution output such as graphic design, while compatibility with a variety of graphics cards including AMD Eyefinity, ensures issue free multi-screen playback.
This active MST Hub supports DP++ and does not require the source or graphics card to support DP++ to provide dual-mode signals
Please note: This hub is not compatible with Apple products
The Lindy mDP to 2 Port HDMI 2.0 18G MST Hub is an ideal solution for expanding or duplicating Mini DisplayPort signals across 2 HDMI monitors or TVs. MST hubs allow for the connection of a single mDP source device including computers, laptops or notebooks to 2 separate HDMI displays, while also providing the ability to visualise content in multiple ways. Signals can be expanded across both displays to show large scale spreadsheets, create immersive panoramic gaming experiences or eye-catching digital signage in retail. Content can also be, independently shown on either display, great for developing a productive, multi-tasking working environment, or duplicated on both displays for use in hospitality, retail or educational scenarios.
With support up to 3840x2160@60Hz 4:4:4 8bit, content can be viewed in ultra-realistic quality, ideal for applications that require a high resolution output such as graphic design, while compatibility with a variety of graphics cards including AMD Eyefinity, ensures issue free multi-screen playback.
This active MST Hub supports DP++ and does not require the source or graphics card to support DP++ to provide dual-mode signals
Please note: This hub is not compatible with Apple products
This splitter cable enables a computer, which supports simultaneous digital and analogue video output via its DVI-I output port, to be connected to two separate monitors, e.g. one DVI TFT and one VGA CRT.
Please Note: Before purchasing this cable, please ensure that your computer can output simultaneous digital and analogue signals from its DVI-I port. You may need to check your system documentation or contact your the computers manufacturer for clarification.
This splitter cable allows two monitors to be connected to a computer's single DVI port. It's a passive cable which simply splits a single DVI signal into two without any amplification or signal regeneration, making it an ideal, cost effective solution for shorter installations.
The Lindy DP to 2 Port HDMI 2.0 18G MST Hub is an ideal solution for expanding or duplicating DisplayPort signals across 2 HDMI monitors or TVs. MST hubs allow for the connection of a single DP source device including computers, laptops or notebooks to 2 separate HDMI displays, while also providing the ability to visualise content in multiple ways. Signals can be expanded across both displays to show large scale spreadsheets, create immersive panoramic gaming experiences or eye-catching digital signage in retail. Content can also be, independently shown on either display, great for developing a productive, multi-tasking working environment, or duplicated on both displays for use in hospitality, retail or educational scenarios.
With support up to 3840x2160@60Hz 4:4:4 8bit, content can be viewed in ultra-realistic quality, ideal for applications that require a high resolution output such as graphic design, while compatibility with a variety of graphics cards including AMD Eyefinity, ensures issue free multi-screen playback.
This active MST Hub supports DP++ and does not require the source or graphics card to support DP++ to provide dual-mode signals
Please note: This hub is not compatible with Apple products"
DisplayPort MST Hubs allow for the connection of multiple displays to a single DP source, to create larger workstation setups or larger scale DP distribution.
The Lindy DisplayPort to Quad HDMI MST/SST Hub with Video Wall Processor is a high-performance DP 1.2 MST and SST hub, with Video Wall, Duplicate, Extended and Expander View / Eyefinity functions.
To create a wide variety of display solutions, this processor groups the displays connected to port 1 and 2 together to create 1 single output, and then also apply this to the displays connected to 3 and 4.
This allows for the use of 4 different modes as detailed below. Maximum supported resolution can depend on the windows configuration, graphics card and connected display.
Video Wall Mode:
· Supports resolutions up to 3840x2160@60Hz using 4 displays connected together to create a single display, visualised as a 2x2 video wall.
· This is a great solution for digital signage in retail, transport hubs or trade shows.
For the system requirements and set-up instructions of certain graphics cards, please refer to the Lindy manual under the Downloads section of this page.
Duplicate Mode:
· Supports resolutions up to 1920x1080@60Hz per display, using up to 4 displays. This works similar to a standard DisplayPort splitter with SST functionality, duplicating the input signal onto each individual display. The processor can also split the signal across 2 individual 4K displays, with resolutions up to 3840x2160@60Hz.
· Using the grouped layout, resolutions up to 3840x1080@60Hz can be supported, duplicating the signal across the 2 separate groups (1+2) and (3+4).
These modes are great for use in security, surveillance and control installations.
Extended Mode:
· This mode supports resolutions up to 3840x1080@60Hz per display by using the grouped layout of displays 1+2 and 3+4. Content can be then shared across the 2 layouts simply by dragging the mouse across the displays.
This is useful for creating a large-scale office setup, or in graphic designs installations where users want to easily transfer content to another display or user.
Expander / Eyefinity Mode:
· This mode allows for the connection of 4 displays to create a multi-display workstation, viewed as a single display with resolutions up to 7680x1080@60Hz, with each display showing Full HD signals. Alternatively using 2 4K displays viewed as a single display, 7680x2160@30Hz can be viewed. This allows for the creation of a premium office or home workstation, or high-performance control set-ups in broadcasting and surveillance.
Multiple MST/SST hubs can be used to create even larger display setups, providing this cna be supported by the display driver and graphics card.
Please note: This active MST Hub requires the source or graphics card to support DP++ to provide dual-mode signals
Please note: this MST hub does not support output to 3 displays.
Please note: NVIDIA graphics cards require a display to be connected to the graphics card for control. Intel and AMD cards do not require this.
The Lindy 8 Port HDMI 18G Splitter is a compact, high quality solution for distributing HDMI 2.0 18G signals across multiple displays from one source device. With support for resolutions up to 4K 60Hz 4:4:4 8bit, this splitter is great for creating eye-catching digital signage in retail scenarios, showing high quality video in different rooms in medical facilities or ensuring audiences do not miss any of the action in dual display sports bars. Additional support for High-Dynamic Range ensures video content can be seen with enhanced brightness, superior contrasts and a much wider colour gamut, for more lifelike colour.
The additional ability to cascade this splitter up to three further levels allows for an extended HDMI splitting experience, ideal for multi-screen situations such as informational broadcasting in airports, train stations or stock exchange offices.
HDCP 2.2 support ensures there are no issues with a variety of 4K content when connected to source devices including set top boxes, Blu-Ray players and 4K HDR media players, while a smart EDID management switch on the unit provides maximum compatibility with the display. The splitters durable, compact design also ensures the unit can be installed discreetly, ensuring there is no distraction from the content on screen and with a screw type DC jack. Additionally, the power supply is connected via a screw type DC jack, providing a secure and reliable connection, ideal for installations where accidental disconnections could occur.
 |