For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
This product has been discontinued and replaced by Part No 21983.
Supports 4 x 2.5" SAS and SATA II/1.0a HDDs (not included)
Supports 9.5mm or 12.5mm height HDDs
Dip switch to set LED and spin up behaviour between:
LED flickering for HDD access and staggered HDD spin up
No LED flickering for HDD access and HDD spin up on power
Fits into a standard 5.25" expansion bay
RAID compatible when connected to a suitable
Supports hot swap function
2 year warranty
The LINDY SAS/SATA RAID Back Plane system is an internal drive housing that supports up to four 2.5" SAS/SATA hard drives in a single 5.25" expansion bay. It can easily be installed into a case or expansion system and is ideal for servers and workstations alike, allowing instant hot-swap access to the hard drives. To add RAID functionality, simply connect the back plane system to your computers RAID controller.
As the back plane system uses 2.5" SAS/SATA HDDs (not supplied) it consumes only a fraction of the power used by similar systems using 3.5" HDDs and requires less cooling - so is quieter to run.
For 4 x 2.5" SAS and SATA II/1.0a HDDs
Single bay 5.25" back plane module, with 4 x inner HDD tray
2 ventilation fans (40 x 40 x 10mm) for high performance, high speed drive cooling
Hot Plug support - for extremely quick HDD changing/swapping and shortest down time
Metal aluminium body with metal HDD frames
LED for Power & HDD Activity
Internal HDD SAS dual data channel backplane connector, SATA drive compliant
4 x SATA 7 pin primary data channel (black)
4 x SATA 7 pin secondary data channel (yellow)
1 x SATA 15 pin internal power connector
2.5” HDD frames with front doors with locking mechanism
Compliant with 2.5" SAS and SATA HDDs with height up to 12.5/15mm. For use with 15mm HDDs the upper cover of each individual drive tray has to be skipped