When used in conjunction with our IPower Control 8 Port this sensor will measure the ambient temperature within a network enclosure. The current temperature can be viewed using a web browser interface in conjunction with IPower Control 8 Port.
This temperature & humidity sensor for Lindy IPower Switch Pro 8 provides reliable information about the environment temperature and humidity. The small form factor and a 1.8m (5.91ft) long cable allows a flexible and discreet installation.
Remote management switch for up to 8 computers or other devices
Daily, Weekly, Monthly & Yearly Power Consumption Data
IPv4 and IPv6 Support
TLS/SSL Web Browser (Https) for set up and operation
2 year warranty
This IP Power Switch Classic 8 is an advanced power management solution which connects to your existing network infrastructure to provide convenient remote control power management and monitoring of equipment. System administrators can control the power to multiple servers, workstations, hubs, switches, routers etc allowing reboot and power-on and off functions, via a simple to use browser interface.
The Lindy IPower Switch 4 DIN S Pro allowes switching of 4 different relay outputs and monitoring of 8 passive signal inputs. It also supports a master command to switch off all relays at the same time.
For monitoring, it supports a web based configuration which is also able to send automaticly generated emails including all configured data.
Ideal for the use within medium size areas like AV Installations, to control the power supply of different devices from a control room or other locations, outside the installation area.
Cross-platform operation via web interface - HTTP(S) based, email (SSL, STARTTLS)
2 year warranty
The Lindy IPower Control Plus IEC Pro allows you to manage the power of a single device over an IP based network. It connects to your existing network to provide remote control power operation of a connected server, workstation, hub, router or almost any other mains - IEC C13 - powered device. A simple web interface allows rebooting and control of power on/off functions.
Note: For connecting your device to the IPower Switch you will need an IEC to IEC Extension Cable.