For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
The NetSwitchBox 442 provides 4 potential-free switching outputs, 4 passive inputs, and 2 sensor inputs which allow for the switching of small signals (up to 24V), the interrogation and visualisation of passive contacts (e.g. door contacts), as well as the interrogation of two temperature- and/or temperature/moisture sensors. The data are requested and visualised on a Web site generated by the device. The data can be evaluated via SNMP or Syslog.
Power adapter not included in delivery. Suitable power adapter: LINDY - Art.No. 73803
Four individually switchable, potential-free relay outputs (no and nc), 24 V switching voltage.
Four autonomous switching inputs
Two inputs for temperature- or hybrid sensors (temperature & moisture)
Each switching input can either be used passively (e.g. called by door contact, smoke alarm, etc) or triggered by an input voltage of up to 24 V (electrically isolated through an optocoupler)
States of inputs/outputs are indicated using two-Colored LEDs on the front
Outputs can be switched manually from the unit
All platforms - controlled from Web browser
Switchable from all PCs via Web interface and SNMP set in the network (also over Internet)
Watchdog function for the switching contacts (monitor connected network devices through regular pings. The corresponding output will be reset if the unit stops responding)
Batch mode allows you to switch the relay contacts and, after a configurable time period, make it return to its previous state automatically
Dynamically assign an IP address via DHCP or manual assignment of a fixed IP address.
Firmware update via Ethernet while unit is running (without needing to restart the power ports)
SNMP support (SNMPv1, SNMPv2c)
SNMP traps (SNMPv1, SNMPv2c)
Access protection via IP access control
Access protection via optional HTTP password
Basic, flexible configuration via Web browser, Windows program GBL_Conf or Linux program gblc
Powered via PoE or optional power adapter (12 V)
Designed and manufactured in Germany
105mm x 28mm x 105mm (L x H x W)
Ethernet (RJ45), analogue sensor connections (RJ45), 12 V power adapter connection (2.5mm barrel plug), switching outputs (2 x 4x industrial terminal strips), switching inputs (5x industrial terminal strip)