The  NetSwitchBox 012 is a small, handy device which gives users access to the different possibilities afforded by remote control The unit has a relay contact which can be accessed and switched via a TCP/IP network. It is possible to connect and interrogate up to 2 sensors. Any PC in the network can be controlled remotely, remote control is also possible over the Internet.

The NetSwitchBox 012 has two inputs for sensors and a switching output.

• Connections for external sensors with connection cable (2 m)
• A freely-switchable, potential-free relay outputs, 24 V switching voltage
• Output states are indicated using two-Colored LEDs on the front
• Output can be switched manually from the unit
• All platforms - controlled from Web browser
• Switchable from all PCs via Web interface and SNMP set in the network (also over Internet)
• Watchdog function for the switching contact (monitor connected network devices through regular pings. The corresponding output will be reset if the unit fails stops responding).
• Batch mode allows you to switch the relay contact and, after a configurable time period, make it return to its previous state automatically
• Dynamically assign an IP address via DHCP or manual assignment of a fixed IP address.
• Firmware update via Ethernet while unit is running (without needing to restart the power ports)
• SNMP support (SNMPv1, SNMPv2c)
• SNMP traps (SNMPv1, SNMPv2c)
• Syslog support
• Access protection via IP access control
• Access protection via optional HTTP password
• Basic, flexible configuration via Web browser, Windows program  GBL_Conf or Linux program gblc
• Power supply via PoE, or power adapter (12 V, not included)
• Designed and manufactured in Germany

Technical specifications