Allow convenience functions
Allow shop optimisations
In order to optimise our website, we use services that collect and aggregate data and make it available to us as a statistical overview.
The NetSwitchBox 012 is a small, handy device which gives users access to the different possibilities afforded by remote control The unit has a relay contact which can be accessed and switched via a TCP/IP network. It is possible to connect and interrogate up to 2 sensors. Any PC in the network can be controlled remotely, remote control is also possible over the Internet.
The NetSwitchBox 012 has two inputs for sensors and a switching output.
Connections for external sensors with connection cable (2 m)
A freely-switchable, potential-free relay outputs, 24 V switching voltage
Output states are indicated using two-Colored LEDs on the front
Output can be switched manually from the unit
All platforms - controlled from Web browser
Switchable from all PCs via Web interface and SNMP set in the network (also over Internet)
Watchdog function for the switching contact (monitor connected network devices through regular pings. The corresponding output will be reset if the unit fails stops responding).
Batch mode allows you to switch the relay contact and, after a configurable time period, make it return to its previous state automatically
Dynamically assign an IP address via DHCP or manual assignment of a fixed IP address.
Firmware update via Ethernet while unit is running (without needing to restart the power ports)
SNMP support (SNMPv1, SNMPv2c)
SNMP traps (SNMPv1, SNMPv2c)
Access protection via IP access control
Access protection via optional HTTP password
Basic, flexible configuration via Web browser, Windows program GBL_Conf or Linux program gblc
Power supply via PoE, or power adapter (12 V, not included)