You are here: » Homepage
Featuring 8 AV inputs which can be converted and scaled to resolutions up to Full HD 1080p this AV Conversion Switch is an ideal addition to any meeting or conference room, lecture hall or auditorium. Any of the available inputs (3 x HDMI, 3 x VGA & Audio, Component Video & Audio and Composite Video & Audio) can be simultaneously shown across display equipment connected to each of the outputs (2 x HDMI and VGA). These three outputs provide compatibility with both current and legacy AV displays and can be combined with Lindy HDMI or VGA extenders to reach remotely loCat.ed displays.
In addition to its video capabilities the AV Conversion Switch also features Digital to Analogue and Analogue to Digital conversion and can also embed analogue audio to HDMI video signals. With simultaneous audio output via 3.5mm stereo socket and Coaxial SPDIF the Switch can be directly connected to almost any AV Receiver in the market, whilst for further flexibility one of the HDMI outputs can also be used for audio.
The Switch features remote configuration and control via RS-232, Telnet and Web GUI as well as locally by OSD and IR making it simple to integrate within automated installations.
The LINDY Multi AV Input to HDMI Presentation Switch allows you to conveniently share content from a variety of devices to a HDMI display, such as a projector, using just a single cable. Each of the connected devices is instantly converted and scaled to a HDMI signal, with the Presentation Switch automatically switching to use the most recently active device, making it ideal for use in class rooms, meeting/conference rooms and auditoriums. For added convenience the Switch also features an Ethernet pass though port and a USB charging (5V 1.5A) port, handy for use in the absence of WiFi or for powering mobile devices. When the switch is not in use the integrated protection panel can be pulled over the connectors hiding them from sight and protecting them from dust.
In addition to the options given by the ports featured on the Switch, it is also possible to connect devices featuring different interfaces such as DisplayPort, DVI, MHL, Slimport using our range of AV converters. The Presentation Switch can be used in conjunction with our range of long length HDMI cables and HDMI Extender's to reach even the most awkwardly located display or projector.
Multi AV Input to HDMI Presentation Switch
Desk Mount Hooks x 2
12V 2A Multi-Country Power Supply
Designed to connect multiple source devices with HDMI display equipment this Presentation Switch features DisplayPort, HDMI and VGA inputs, which are directly converted to HDMI at resolutions up to 4K Ultra HD, without scaling. In addition to support for 4K Ultra HD resolutions the Switch also supports HDCP 2.2 protected signals and both DTS and Dolby Digital audio pass-through making it suitable for both PC and AV applications.
Switching between the connected source devices can be completed using the Presentation Switch’s Auto-Sensing function which automatically switches to a newly connected/powered on device, via the front panel push buttons or using the supplied IR remote control. IR codes are also provided to enable integration of the switch within a larger AV installation. The switch is supplied with mounting brackets which allow it to be conveniently installed according to the installation environment.
The Presentation Switch is an ideal addition to any meeting or conference room, lecture hall or auditorium. For added flexibility the Switch can be used with LINDY’s range of HDMI Extenders, to reach remote displays and projectors.
Please Note: Using the auto-sensing switching feature with the DisplayPort input requires the use of the supplied all pins connected 20 Pin DisplayPort cable between the source PC or Notebook and the switch.
The Lindy HDBaseT Presentation System is a powerful presentation system that allows three source devices to be connected to a remote display at up to 70 metres. This device uses three key components that create smart, autonomous presentation, education or collaboration spaces.
An HDBaseT multi-AV transmitter with support for HDMI, VGA with audio and USB inputs which can be surface mounted. An HDBaseT receiver with dual channel analogue audio extraction, microphone input, RS232 and USB control from an interactive board, designed for discreet installation. Finally, a separate wall mounted room control panel is included to quickly switch between input devices, adjust volumes and power on or off the display.
Both the multi-AV transmitter and control panels are both designed using PoH (power over HDBaseT) which provides power to both units alongside data using a standard Cat.6 network cable. This removes complexity from installations by allowing a single power supply to provide power to the entire system.
4K UHD video, multi-channel & digital audio formats including DTS-X & Dolby Atmos can be transmit 40m (131.23ft) over a single HDBaseT connection allowing the receiver can be conveniently placed in a wall or ceiling cavity depending on the locations of other connected devices such as a display, projector, sub-woofers and speakers. Distances up to 70m (229.66ft) are possible with 1080p video signals.
The inclusion of a relay port on the receiver allows room automation with devices such as a motorised projector screen or lighting to be configured to trigger once video devices are connected or disconnected.
Using reliable HDBaseT technology, single cable installation and PoH means this system is perfectly suited for education in a classroom or training room environment. Control over this system is managed through not only the wall plate, but also from a web GUI which is freely available on any device occupying the same network, including mobile devices. This can be used to switch or set a video input, display device connection status’, determine when the relay device is used and much more.
HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
Please note: The Transmitter Wall Plate requires a double gang US Style backbox and the Control Wall Plate requires a single gang US style backbox, both with hole spacing of 8.33cm (3.281")
The Lindy Presentation switch Pro is a versatile, professional solution for switching multiple AV source devices and outputting to a single HDMI display while providing revolutionary audio control and superior extending of the video signal via an included HDBaseT 70m receiver.
With support for input resolutions up to 4K@60Hz, and additional support for HDR, content can be seen with incredible clarity ensuring a detailed, engaging display of 4K video for educational presentations in lecture halls, corporate training or use in events where impressive content is required to captivate an audience.
This switch also features a wide range of professional audio options and connections to not only add multi-dimensional sound to create a more immersive and interactive user experience including balanced and un-balanced microphone inputs, but also provide greater control over audio processing. This allows the user to auto-mix or provide volume adjustment autonomously so specific audio sources can be amplified and background audio can be reduced when required, great for public announcements during presentations.
Source devices can be simply controlled with a variety of management options including Web Gui, IR and telnet control, providing the user with reliable, hassle-free access over source device switching, volume adjustment and the switch’s OSD.
For enhanced flexibility, this switch is supplied with a high quality HDBaseT receiver to reach remote displays and projectors, at distances of up to 70m, ideal for larger lecture halls or presentation rooms. This receiver also features IR and RS-232 ports to provide control at a distance using the included remote or a PC.
The Lindy Multi-format conference table switch is a premium design, multi-function solution for providing hassle-free control over multiple digital and analogue source devices when connected to a single HDMI display or projector, while also ensuring the maximum possible resolution is shown using automatic conversion and scaling to HDMI.
The switch can mounted securely inside a conference table or podium with a high quality metal cover for a more discreet installation, while allowing simple access for connecting multiple devices, providing a perfect addition to any collaborative meeting room or live presentation podium.
Supporting resolutions up to 4K 60Hz 4:4:4 8bit, content can be viewed in crystal clear 4K Ultra HD quality, perfect for viewing engaging presentations, high-res design content or detailed spreadsheets, while the unit’s scaling capabilities ensure whether a digital signal, from a HDMI Blu-ray player or mDP laptop, or an analogue signal, from a VGA compatible PC, is connected, the highest possible resolution is displayed with issue free playback. The switch also features two simple methods for control between multiple AV source devices, either by a manual push button on the unit or via auto-switching, which will automatically switch to the last active signal.
For added convenience the switch also features an Ethernet port and a USB charging Type C port, ideal for use in the absence of Wi-Fi or for powering mobile devices and some laptops.