We use third party services that help us to improve and optimize our online experience. For the use of certain services we need your prior consent which can be revoked at any time. You can find further information on data protection in our privacy policy
Details
In order to optimise our website, we use services that collect and aggregate data and make it available to us as a statistical overview.
You are here: » Homepage
The Lindy HDBaseT Presentation System is a powerful presentation system that allows three source devices to be connected to a remote display at up to 70 metres. This device uses three key components that create smart, autonomous presentation, education or collaboration spaces.
An HDBaseT multi-AV transmitter with support for HDMI, VGA with audio and USB inputs which can be surface mounted. An HDBaseT receiver with dual channel analogue audio extraction, microphone input, RS232 and USB control from an interactive board, designed for discreet installation. Finally, a separate wall mounted room control panel is included to quickly switch between input devices, adjust volumes and power on or off the display.
Both the multi-AV transmitter and control panels are both designed using PoH (power over HDBaseT) which provides power to both units alongside data using a standard Cat.6 network cable. This removes complexity from installations by allowing a single power supply to provide power to the entire system.
4K UHD video, multi-channel & digital audio formats including DTS-X & Dolby Atmos can be transmit 40m (131.23ft) over a single HDBaseT connection allowing the receiver can be conveniently placed in a wall or ceiling cavity depending on the locations of other connected devices such as a display, projector, sub-woofers and speakers. Distances up to 70m (229.66ft) are possible with 1080p video signals.
The inclusion of a relay port on the receiver allows room automation with devices such as a motorised projector screen or lighting to be configured to trigger once video devices are connected or disconnected.
Using reliable HDBaseT technology, single cable installation and PoH means this system is perfectly suited for education in a classroom or training room environment. Control over this system is managed through not only the wall plate, but also from a web GUI which is freely available on any device occupying the same network, including mobile devices. This can be used to switch or set a video input, display device connection status’, determine when the relay device is used and much more.
HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
Please note: The Transmitter Wall Plate requires a double gang US Style backbox and the Control Wall Plate requires a single gang US style backbox, both with hole spacing of 8.33cm (3.281")
The Lindy Ultra HD Multi-View Video Processor is a powerful solution that allows multiple sources to be shown on a single display along with a second output for monitoring a specific input. The Video Processor features full scaling abilities and signal conversion for complete flexibility.
Ideal for situations where multiple video signals must be constantly monitored, for example CCTV stations or statistic and performance monitoring applications in security, retail or corporate environments.
Featuring HDMI, DisplayPort and VGA inputs with HDMI and DisplayPort outputs the Video Processor can be combined with Lindy’s range of high quality Extenders for HDMI, DisplayPort and VGA signals, allowing the Video Processor to be installed near the source or display equipment as required.
Screen Modes and Pre-set Layouts
PoP/PiP and Multi-View video modes can be configured by the unit. This provides complete control over where each input is displayed on a single screen using any combination of up to 4 video sources. 6 pre-set video layouts allow for simple, out of the box, setup and installation. These layouts can be selected using the front panel buttons or using the Web GUI tool.
Monitoring Output
A separate DisplayPort output is provided for full screen monitoring, ideal for close observation of a specific input signal.
Scaling and Signal Conversion
The Video Processor features scaling support which enables you to have different input resolutions and the ability to select the output resolution. Full signal flexibility is provided with integrated signal conversion across the unit, for example VGA signals can be converted to HDMI or DP signals.
The Lindy Multi-format Presentation Switch is a high end solution for providing switching control over multiple digital and analogue source devices when connected to a single HDMI display or projector, while also ensuring the maximum possible resolution is shown using automatic conversion and scaling to HDMI.
Supporting resolutions up to 4K 60Hz 4:4:4 8bit, content can be viewed in crystal clear 4K Ultra HD quality, perfect for engaging presentations or lectures in educational or meeting room settings, while the unit’s scaling capabilities ensure whether a digital signal, from a HDMI Blu-ray player or mDP laptop, or an analogue signal, from a VGA compatible PC, is connected, the highest possible resolution is displayed with issue free playback. The switch also features two simple methods for control between multiple AV source devices, either by a manual push button on the unit or via auto-switching, which will automatically switch to the last active signal.
For added convenience the switch also features an Ethernet port and a USB charging Type C port, ideal for use in the absence of Wi-Fi or for powering mobile devices and some laptops.
The Lindy Multi-format conference table switch is a premium design, multi-function solution for providing hassle-free control over multiple digital and analogue source devices when connected to a single HDMI display or projector, while also ensuring the maximum possible resolution is shown using automatic conversion and scaling to HDMI.
The switch can mounted securely inside a conference table or podium with a high quality metal cover for a more discreet installation, while allowing simple access for connecting multiple devices, providing a perfect addition to any collaborative meeting room or live presentation podium.
Supporting resolutions up to 4K 60Hz 4:4:4 8bit, content can be viewed in crystal clear 4K Ultra HD quality, perfect for viewing engaging presentations, high-res design content or detailed spreadsheets, while the unit’s scaling capabilities ensure whether a digital signal, from a HDMI Blu-ray player or mDP laptop, or an analogue signal, from a VGA compatible PC, is connected, the highest possible resolution is displayed with issue free playback. The switch also features two simple methods for control between multiple AV source devices, either by a manual push button on the unit or via auto-switching, which will automatically switch to the last active signal.
For added convenience the switch also features an Ethernet port and a USB charging Type C port, ideal for use in the absence of Wi-Fi or for powering mobile devices and some laptops.
The LINDY Multi AV Input to HDMI Presentation Switch allows you to conveniently share content from a variety of devices to a HDMI display, such as a projector, using just a single cable. Each of the connected devices is instantly converted and scaled to a HDMI signal, with the Presentation Switch automatically switching to use the most recently active device, making it ideal for use in class rooms, meeting/conference rooms and auditoriums. For added convenience the Switch also features an Ethernet pass though port and a USB charging (5V 1.5A) port, handy for use in the absence of WiFi or for powering mobile devices. When the switch is not in use the integrated protection panel can be pulled over the connectors hiding them from sight and protecting them from dust.
In addition to the options given by the ports featured on the Switch, it is also possible to connect devices featuring different interfaces such as DisplayPort, DVI, MHL, Slimport using our range of AV converters. The Presentation Switch can be used in conjunction with our range of long length HDMI cables and HDMI Extender's to reach even the most awkwardly located display or projector.
Package Contents:
Multi AV Input to HDMI Presentation Switch
Desk Mount Hooks x 2
12V 2A Multi-Country Power Supply
LINDY Manual
Designed to connect multiple source devices with HDMI display equipment this Presentation Switch features DisplayPort, HDMI and VGA inputs, which are directly converted to HDMI at resolutions up to 4K Ultra HD, without scaling. In addition to support for 4K Ultra HD resolutions the Switch also supports HDCP 2.2 protected signals and both DTS and Dolby Digital audio pass-through making it suitable for both PC and AV applications.
Switching between the connected source devices can be completed using the Presentation Switch’s Auto-Sensing function which automatically switches to a newly connected/powered on device, via the front panel push buttons or using the supplied IR remote control. IR codes are also provided to enable integration of the switch within a larger AV installation. The switch is supplied with mounting brackets which allow it to be conveniently installed according to the installation environment.
The Presentation Switch is an ideal addition to any meeting or conference room, lecture hall or auditorium. For added flexibility the Switch can be used with LINDY’s range of HDMI Extenders, to reach remote displays and projectors.
Please Note: Using the auto-sensing switching feature with the DisplayPort input requires the use of the supplied all pins connected 20 Pin DisplayPort cable between the source PC or Notebook and the switch.
Featuring 8 AV inputs which can be converted and scaled to resolutions up to Full HD 1080p this AV Conversion Switch is an ideal addition to any meeting or conference room, lecture hall or auditorium. Any of the available inputs (3 x HDMI, 3 x VGA & Audio, Component Video & Audio and Composite Video & Audio) can be simultaneously shown across display equipment connected to each of the outputs (2 x HDMI and VGA). These three outputs provide compatibility with both current and legacy AV displays and can be combined with Lindy HDMI or VGA extenders to reach remotely loCat.ed displays.
In addition to its video capabilities the AV Conversion Switch also features Digital to Analogue and Analogue to Digital conversion and can also embed analogue audio to HDMI video signals. With simultaneous audio output via 3.5mm stereo socket and Coaxial SPDIF the Switch can be directly connected to almost any AV Receiver in the market, whilst for further flexibility one of the HDMI outputs can also be used for audio.
The Switch features remote configuration and control via RS-232, Telnet and Web GUI as well as locally by OSD and IR making it simple to integrate within automated installations.
The Lindy Presentation switch Pro is a versatile, professional solution for switching multiple AV source devices and outputting to a single HDMI display while providing revolutionary audio control and superior extending of the video signal via an included HDBaseT 70m receiver.
With support for input resolutions up to 4K@60Hz, and additional support for HDR, content can be seen with incredible clarity ensuring a detailed, engaging display of 4K video for educational presentations in lecture halls, corporate training or use in events where impressive content is required to captivate an audience.
This switch also features a wide range of professional audio options and connections to not only add multi-dimensional sound to create a more immersive and interactive user experience including balanced and un-balanced microphone inputs, but also provide greater control over audio processing. This allows the user to auto-mix or provide volume adjustment autonomously so specific audio sources can be amplified and background audio can be reduced when required, great for public announcements during presentations.
Source devices can be simply controlled with a variety of management options including Web Gui, IR and telnet control, providing the user with reliable, hassle-free access over source device switching, volume adjustment and the switch’s OSD.
For enhanced flexibility, this switch is supplied with a high quality HDBaseT receiver to reach remote displays and projectors, at distances of up to 70m, ideal for larger lecture halls or presentation rooms. This receiver also features IR and RS-232 ports to provide control at a distance using the included remote or a PC.
The Lindy Switching Presentation Scaler is a versatile, professional solution for switching and scaling up to 4 AV source devices and outputting to a single display, while providing multiple seamless control options including separate table grommets for creating a collaborative meeting room environment or engaging presentations in the workplace or in education. With dual HDMI, VGA and DisplayPort input ports, this switch can be connected to a variety of source device including PCs, media players or laptops and output to a single display or projector, and with support for resolutions up to 4K@60Hz 4:2:0, content can be viewed in highly detailed Ultra HD quality. The in-built up and down scaler function ensures the optimum video quality possible of the display is used, easily controlled via a neat push button on the unit. Any VGA source device’s stereo audio can be separately embedded into HDMI, or extracted to stereo speakers to add dual channel audio to video content when audio pass-through is not available or a speaker system is preferred.
HDMI, DisplayPort and VGA table grommets are included to give a convenient extra dimension of control for the user, simply connecting directly to the source device via the required cable, a perfect solution for enhancing board room meetings or educational lectures. These grommets feature two push button options, a switching option to make a specific source device active for the display, and a black screen option, to stop showing video. Combined with IR, RS232 and push button control on the unit itself, this switch is a hassle-free yet effective solution for the user.