For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
Provides a convenient and secure method of remotely locating workstations or servers without compromising convenience and control
Distances of up to 300m supported between local and remote units
Dual console operation - control your computer / KVM Switch from both local and remote locations
High-resolution video support: 800 x 600 @ 300m; 1600 x 1200/1680 x 1050 @ 200m
Easy, user-friendly installation - no special software required
2 Year warranty
The KVM Extender Classic allows you to control your PC, server or KVM switch from a keyboard, mouse and monitor at distances of up to 300 metres away. It consists of a Transmitter and a Receiver connected together using low cost CAT5 or higher cable. The Transmitter connects to a computer or KVM switch while the Receiver is located at a remote location and connects to a keyboard, monitor and mouse console.
The KVM Extender Classic is ideal for network managers and system administrators as a workstation can be connected to the Receiver unit allowing the operator to work on his computer or remotely on the KVM switch. In addition a local console can be connected to the Transmitter unit for direct access to the KVM switch.
PS/2 & VGA Extender for distances up to 300m via inexpensive CAT5 cable
Supports display resolutions of 800 x 600 @ 300m; 1600 x 1200/1680 x 1050 @ 200m
Compatible with all common operating systems - no driver or special software installation required
Remote Receiver with calibration controls to compensate for Gain and Focus
Remote Receiver (at the user end):
2x PS/2 Female for mouse & keyboard + 1x HD-15 Female for monitor
2x PS/2 Female + 1x HD-15 Female to connect a local computer, 0.8m and 1.5m KVM cables included
RJ-45 Female for CAT5 cable
Power socket for included power supply
Local Transmitter (at the PC/KVM switch end):
2 x PS/2 Female + 1x HD-15 Female for the PC or KVM switch
2 x PS/2 Female for mouse & keyboard + 1x HD-15 Female for connecting a local console