2 x 15 Way SATA Power Connector (Female) to 5.25" Power Male
Internal Power Cable
10 Year warranty
Most modern SATA drives do not use the standard 5.25" type power connector as fitted to older IDE/ATA hard drives. This adapter cable converts the four pin 5.25" power connector from your PCs power supply into two 15 pin connections suitable for use with SATA drives.
Adapts a SATA connector for use with standard Molex devices
15 Way SATA Male to LP4 Molex Female
Colour coded cables
10 Year Warranty
This simple adapter cable allows you to connect a hard disk or CD/DVD-ROM drive, equipped with a standard LP4 Molex type power connector, to a computer's SATA power supply. Ideal for adding older devices to a newer SATA equipped computer.
Note: Pay attention to the strength of the individual outputs of your power supply (usually this information can be found on the power supply) and the power requirement of all of the components in your PC used.
This 8-pin power extension cable is needed on modern EPS, ATX and BTX mainboards for supplying power to the processor. In contrast to the older, 4-pin ATX12V Mainboard- and power supply connections, this connection has double the width, 2x 4-pin. The connector can be split into two 4-pin connectors on the mainboard side, from which one of them also fits the older mainboards. Even only a 4-pin connector can be inserted onto the other 8-pin side individually, the other 4 pins then do not receive any current. Please read the instructions provided by the mainboard manufacturer.