We use third party services that help us to improve and optimize our online experience. For the use of certain services we need your prior consent which can be revoked at any time. You can find further information on data protection in our privacy policy
Details
Allow convenience functions
Allow shop optimisations
In order to optimise our website, we use services that collect and aggregate data and make it available to us as a statistical overview.
Power socket board for 19 inch systems for monitoring electrical devices via a TCP/IP network. The IPowerMeter measures current, phase angle, power factor (cos phi), frequency, active-, apparent- and reactive power and indicates the consumed energy in two independent meters. All of the readings are indicated on the device itself and can be accessed via TCP/IP network.
Measuring current, voltage, phase angle, power factor (cos phi), frequency, active-, apparent and reactive power (total value for all connected devices)
Two energy meters: One meter counts continuous from commissioning, another meter can be reset.
All values are also indicated via a lit 2-row display
Compact size, 19" 1U, 8 IEC 320 C13 outputs
Dynamically assign an IP address via DHCP or manual assignment of a fixed IP address.
Firmware update via Ethernet
SNMP support (SNMPv1, SNMPv2c)
SNMP traps (SNMPv1, SNMPv2c)
Syslog support
Access protection via IP access control
Access protection via optional HTTP password
Basic and flexible configuration via Web browser, Windows program GBL_Conf or Linux program gblc
Designed and manufactured in Germany
Technical details
Technical specifications
Dimensions
485 mm x 44.5 mm x 44.5 mm (L x H x W) with bracket
Weight
≈ 1 kg
Interfaces
Network interface, RJ45
Maximum current in total
16 A (≈ 3600 W)
Maximum current per port
10 A
Power consumption (without load)
2 W - 2.5 W
Network connection
10/100 Mbit 10BaseT
Outputs
8 IEC13 outputs, Schuko supply line with 2 m cable 3 x 1.5 mm²