For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
Power socket board for 19 inch systems for monitoring electrical devices via a TCP/IP network. The IPowerMeter measures current, phase angle, power factor (cos phi), frequency, active-, apparent- and reactive power and indicates the consumed energy in two independent meters. All of the readings are indicated on the device itself and can be accessed via TCP/IP network.
Measuring current, voltage, phase angle, power factor (cos phi), frequency, active-, apparent and reactive power (total value for all connected devices)
Two energy meters: One meter counts continuous from commissioning, another meter can be reset.
All values are also indicated via a lit 2-row display
Compact size, 19" 1U, 8 IEC 320 C13 outputs
Dynamically assign an IP address via DHCP or manual assignment of a fixed IP address.
Firmware update via Ethernet
SNMP support (SNMPv1, SNMPv2c)
SNMP traps (SNMPv1, SNMPv2c)
Access protection via IP access control
Access protection via optional HTTP password
Basic and flexible configuration via Web browser, Windows program GBL_Conf or Linux program gblc
Designed and manufactured in Germany
485 mm x 44.5 mm x 44.5 mm (L x H x W) with bracket
≈ 1 kg
Network interface, RJ45
Maximum current in total
16 A (≈ 3600 W)
Maximum current per port
Power consumption (without load)
2 W - 2.5 W
10/100 Mbit 10BaseT
8 IEC13 outputs, Schuko supply line with 2 m cable 3 x 1.5 mm²