We use third party services that help us to improve and optimize our online experience. For the use of certain services we need your prior consent which can be revoked at any time. You can find further information on data protection in our privacy policy
Details
In order to optimise our website, we use services that collect and aggregate data and make it available to us as a statistical overview.
You are here: » Homepage
*Remote control requires Infra-red kit
Easy to set up and install this compact Fibre Optic DVI-D Dual Link Extender is a cost effective, high quality solution for sending DVI-D signals up to 500m without any compression or degradation over MPO Multimode cable.
Unlike other solutions, this extender uses just a single fibre cable to reach such great lengths. The system comprises of transmitter and receiver modules that connect directly to the digital source & display via DVI-D. The modules are then connected using a single, MPO fibre optic cable (not included).
Please note - We recommend using 50/125µ or 62.5/125µ MPO multimode fibre cable. Please contact Technical Support for further advice.
Package Contents
This KVM extender delivers DVI-D single link signals with resolutions up to 1920x1200 without any loss in quality over distances up to 130m using a standard CAT6 cable, or up to 230m via a dedicated gigabit ethernet switch.
It also supports the transmission of USB HID signals for mice, keyboards and USB 2.0 signals for USB touchscreens and mass storage devices such as pen drives and HDD.
In addition to its standard functions the KVM Extender may also have the following features enabled via chargeable unlock codes:
Package Contents:
130m Cat.6 KVM Extender DVI-D & USB - Receiver
12V 1.25A Multi-Country Power Supply (UK, EUR, US & AUS) with 5.5/2.1mm DC Jack
DVI-D Cable, 2m
LINDY Manual
Thank you for purchasing from the LINDY Modular Matrix range of products.
This range of products is designed to allow you to create a matrix with 8, 16 or 32 input and output ports.
The input ports can be a choice of HDMI, DVI or VGA while the output ports can be HDMI, DVI or C6 HDBaseT. Any of the inputs can be combined with any of the outputs to create a UHD 4Kx2K@60Hz 8 bit 4:2:0 display over distances of up to 100m.
The modular design provides the ultimate in flexibility for audio and video distribution as a matrix, convertor or an extender in retail product demonstration, training and public display application in schools, pubs etc.
The 8 Port 4K HDMI Output Modular Board is designed for use with 38250, 38251, 38252 Chassis systems and 38253, 38255, 38256, 38257 & 38259 range of modular boards.
This KVM extender is not available anymore. It is replaced by a successor model with advanced features which is available separately as Transmitter Nr. 39200 and Receiver Nr. 39201.
Thank you for purchasing from the LINDY Modular Matrix range of products.
This range of products is designed to allow you to create a matrix with 8, 16 or 32 input and output ports.
The input ports can be a choice of HDMI, DVI or VGA while the output ports can be HDMI, DVI or C6 HD-BaseT. Any of the inputs can be combined with any of the outputs to create a UHD 4Kx2K@60Hz 8 bit 4:2:0 display over distances of up to 100m.
The modular design provides the ultimate in flexibility for audio and video distribution as a matrix, convertor or an extender in retail product demonstration, training and public display application in schools, pubs etc.
The 8 Port 4K HDMI Input Modular Board is designed for use with 38250, 38251, 38252 Chassis systems and 38254, 38255, 38256, 38257 & 38259 range of modular boards.
Installing an OM3 optical fibre solution gives a simple migration path from 1Gbps to 100Gbps and the security of knowing the system will give many years of solid, secure service to your network.
The MPO trunk assembly features the small, compact size cable, providing a flexible ruggedised product with the addition of improved optical performance. The MPO trunk multicore cable assemblies facilitate rapid deployment of high density backbone cabling in data centres and other high fibre environments reducing network installation or reconfiguration time and cost.
Fitted with high performance MTP® connectors and MPO connectors with multiple engineered product enhancements to improve optical and mechanical performance when compared to generic MPO connectors.
Ideal for use with the LINDY Fibre Optic DVI-D Dual Link Extender.
The LINDY IPower Control 12 is an advanced power management solution which connects to your existing network infrastructure to provide convenient remote control power management of equipment. System administrators can now control the power to multiple servers, workstations, hubs, switches, routers etc. allowing reboot and power-on and off functions, via a simple to use browser interface.
Package Contents:
IPower Control 12
12 x IEC C13 - C14 Power Cables
2 x UK Mains Cable
LINDY User manual
This KVM Extender allows you to control your PC using a keyboard, mouse and monitor with a maximum resolution of Full HD 1080p or 1920x1200 at distances of up to 150m /450 feet using two Cat.6 cables (not included) and without installing any software. It supports HDMI signals, including, 1080p24 Blu-ray, (3D not supported) audio and HDCP. Analogue stereo audio, IR and RS-232 signals are also supported.
The Dual Head Cat.6 HDMI KVM Extender consists of a transmitter unit which is installed near the computer and a receiver unit installed near the user console. The Receiver unit connects to a USB keyboard and mouse, two HDMI monitors and offers an analogue stereo audio port via 3.5mm connector. The Transmitter unit offers the same connections to the computer.
A LCD KVM Console allows an operator to conveniently control and manage a PC, server or KVM switch from a single 19" rack mountable keyboard, touchpad and LCD display console.
The Lindy 17" LCD KVM Console Single Rail is a hardware solution that allows direct control of a computer from an all-in-one Terminal with keyboard, touchpad and 17" monitor. It's ideal for system administrators who want to control one or multiple computers or servers from a single, centralised location.
The Console is designed to be easily installed into 1 Unit of a 19" server cabinet with front to back rail distance from 51 to 100cm (unit depth is 47cm). Display and keyboard are on the same drawer in Single Rail design, can be slided out together only. Key locking mechanism to keep it closed and avoid unauthorized access, perfect in server rooms and data centres, while metal drawer with ball bearing slide rails on each side are essential within industrial environments.
17" LCD screen supports VGA resolutions up to 1280x1024, auto-off function when the display is closed or when no signal is present. Screen adjustments can be access via OSD pushing the buttons near the panel.
The Lindy LCD KVM Console can be connected to a PC or server via VGA to get the video signal, USB or PS/2 (selectable manually by the built in dip switch) ports to control it via keyoboard and touchpad, and to a Lindy KVM Switch for LCD Console via the dedicated Centronics port always on the rear panel. In this way an administrator can access and manage for instance 8 or 16 servers occupying only one unit in a 19" rack.
*Please Note: the Centronics Female port on the rear panel can be used only in combination with Lindy KVM switches for LCD Console. Other stand alone switches can be connected to VGA, USB or PS/2 ports.