• Can be used with PCs, Macs, DVD players, PVR HDD recorders, set top box, games consoles etc
• Automatically detects the mode and resolution of the PC/HDTV input signal
• On-screen display menu system for output resolution and refresh rate selection
• 48MB frame buffer for frame rate conversion
• 2 year warranty

• DisplayPort Hybrid cable that combines the advantages of fibre optic cable with a copper solution for long distance UHD signal delivery
• Supports resolutions up to Ultra HD 4096x2160@60Hz 4:4:4 10bit
• Slimline copper and fibre hybrid construction is highly resistant to EMI & RF interference
• Utilises DisplayPort 1.2 for compatibility with advanced DisplayPort devices
• 2 year warranty

Lindy Fibre Optic Hybrid DisplayPort cables are an all-in-one advanced solution which provide transmission distances that far exceed the maximum supported by standard copper only cables.

Perfect for professional and home cinema environments these cables feature active fibre optic technology integrated into the DisplayPort connectors to allow signal transmission from a source to display over the longest possible distances.

Support for resolutions up to Ultra HD 4096x2160@60Hz 4:4:4 10bit makes these cables suitable for use with advanced DisplayPort enabled sources and displays.

The slimline copper and fibre hybrid construction allows easy installation into recessed, tight spaces. Advanced EMI & RF resistance makes these cables ideal for use in electronically sensitive environments.

Please Note: The cable can only be used in one direction. The connector labelled “source” must be connected to a source device. The connector labelled “display” must be connected to a projector or display.

• Converts broadcast quality SDI video into digital 1080p HDMI
• SDI pass through feature for viewing or extending
• Can be used with any compatible HDMI display
• Plug & Play - simple to install and use
• Multi country power supply included
• 2 year warranty

• Allows extended distance console operation at up to 200m using CAT5/5e cable
• Connects to your PS/2 keyboard and mouse, VGA monitor and stereo speakers
• Supports display resolutions of up to 1024 x 768 @ 200m
• Power supply included

• Provides administrator access to your KVM switches and servers over the LAN, internet or telephone line
• Integrates into almost any existing KVM configuration that uses standard PS/2 keyboard/mouse and VGA monitor signals
• Provides connection for a local KVM console
• KVM cable and 19" rackmount kit included

• IP V.6 protocol not supported

• 2 Year warranty

• Supports up to 8 USB & VGA and PS/2 & VGA equipped computers
• Supports VGA resolutions up to 1920x1200
• Port switching via hotkey or On-Screen Display
• PCs are connected via dedicated KVM cables (not included) at distances of up to 5m
• 2 year warranty

A KVM switch allows an operator to conveniently control and manage multiple devices, such as PCs and servers, from a single keyboard, mouse and display console.

The Lindy Combo KVM Switch is a hardware solution that allows direct control of multiple computers using a single keyboard, mouse and VGA monitor. It's ideal for system administrators who want to control multiple computers or servers from a single, centralised location.

The switch is designed to be easily installed into the back of our range of Modular LCD KVM Consoles to add multiple server/computer control, and is based on our Combo KVM switch. It supports screen resolutions of up to 1920x1200, great for ensuring optimum clarity if used in digital media or graphic design scenarios. It provides 2 simple switching modes, via keyboard hotkeys and On-Screen Display; setup and management options can be access only via the OSD.

The Lindy LCD KVM Console can be connected to a dedicated port on the front of the unit while a Daisy Chain VGA port can be used to connect up to 8 Lindy Combo series switches in order to manage to up to 128 multi platform computers with security features and password access, perfect for large-scale control systems in transport hubs or surveillance centres. All the functions are accessible from the administrator through a simple to use On-Screen Display.

PCs & connected KVM switches can be remove easily with hot plug support, allowing for maintenance to take place without the need for powering down all connected devices, essential within "always on" environments such as data centres or traffic management setups.

Computers or servers can be connected to the 8 host ports on the rear panel via dedicated KVM cables (not included).

These are available in different lengths and connections:

VGA    & USB     & USB - PS/2

1m       33770       

2m       33771       33774

3m       33772       

5m       33773       

Please Note: this switch can be used ONLY in combination with Lindy LCD KVM Consoles "Classic" & "Pro" series. The stand alone version is 8 Port VGA & USB Combo KVM Switch (39523) or 16 Port VGA & USB Combo KVM Switch (39524)

The NetSwitchBox 442 provides 4 potential-free switching outputs, 4 passive inputs, and 2 sensor inputs which allow for the switching of small signals (up to 24V), the interrogation and visualisation of passive contacts (e.g. door contacts), as well as the interrogation of two temperature- and/or temperature/moisture sensors. The data are requested and visualised on a Web site generated by the device. The data can be evaluated via SNMP or Syslog.  

Power adapter not included in delivery. Suitable power adapter: LINDY - Art.No. 73803   

• Four individually switchable, potential-free relay outputs (no and nc), 24 V switching voltage.
• Four autonomous switching inputs
• Two inputs for temperature- or hybrid sensors (temperature & moisture)
• Each switching input can either be used passively (e.g. called by door contact, smoke alarm, etc) or triggered by an input voltage of up to 24 V (electrically isolated through an optocoupler)
• States of inputs/outputs are indicated using two-Colored LEDs on the front
• Outputs can be switched manually from the unit
• All platforms - controlled from Web browser
• Switchable from all PCs via Web interface and SNMP set in the network (also over Internet)
• Watchdog function for the switching contacts (monitor connected network devices through regular pings. The corresponding output will be reset if the unit stops responding)
• Batch mode allows you to switch the relay contacts and, after a configurable time period, make it return to its previous state automatically
• Dynamically assign an IP address via DHCP or manual assignment of a fixed IP address.
• Firmware update via Ethernet while unit is running (without needing to restart the power ports)
• SNMP support (SNMPv1, SNMPv2c)
• SNMP traps (SNMPv1, SNMPv2c)
• Syslog support
• Access protection via IP access control
• Access protection via optional HTTP password
• Basic, flexible configuration via Web browser, Windows program  GBL_Conf or Linux program gblc
• Powered via PoE or optional power adapter (12 V)
• Designed and manufactured in Germany