We use third party services that help us to improve and optimize our online experience. For the use of certain services we need your prior consent which can be revoked at any time. You can find further information on data protection in our privacy policy
Details
In order to optimise our website, we use services that collect and aggregate data and make it available to us as a statistical overview.
You are here: » Homepage
The NetSwitchBox 220 is a small, handy device which gives users access to the different possibilities afforded by remote control It has two inputs and two outputs which can be accessed and switched via a TCP/IP network. Any PC in the network can be controlled remotely, remote control is also possible over the Internet.
The NetSwitchBox 220 has two inputs and two outputs.
The NetSwitchBox 012 is a small, handy device which gives users access to the different possibilities afforded by remote control The unit has a relay contact which can be accessed and switched via a TCP/IP network. It is possible to connect and interrogate up to 2 sensors. Any PC in the network can be controlled remotely, remote control is also possible over the Internet.
The NetSwitchBox 012 has two inputs for sensors and a switching output.
The switch board for TCP/IP networks- high-quality, produced in Germany. Connect up to 4 PCs, routers, access points or other electrical devices up to a power consumption of 3 680 W over the network easily. Switch access is by means of any Web browser - also password-protected where required.
You can also define timed switching operations using the supplied command line tool and e.g. .the Windows scheduler. The built-in measurement connection allows you to connect a temperature sensor to the device. This is available from us upon request. If used, the ambient temperature can then be displayed in the main menu and the switching menu and can be read out via SNMP.
Various end devices can be monitored via the built-in watchdog function. Either ICMP pings or TCP pings are sent to the device being monitored. If a response is not received to these pings within a certain time (the time and the number of attempts can both be configured), the matching power port is reset. Servers or NAS systems which have failed can be restarted automatically.
Control four DVI-Single Link equipped computers using a single keyboard, monitor and mouse with independent control over audio.
An integrated USB 2.0 hub allows you to share USB devices such as pen drives, hard drives and printers, between the computers.
Representing excellent value for money it can support both high resolution digital and analogue systems.
It also comes complete with all the required connection cables allowing you to quickly set-up your workplace. Dimensions: 255 x 120 x 46 mm (WxDxH).
True Transparent USB switching is an advanced USB emulation technology. It allows the KVM to recognise specific Keyboard & Mouse models and emulate any of their associated special key and function information.
A unique switching arrangement allows the built-in USB hub to be switched independently of the computers allowing you to print from one PC whilst playing games on another.
Similarly, independent audio switching means you can listen to music from one computer while browsing the internet on the other.
Supports DVI-I single link monitors and computers with video resolutions of up to an 1920 x 1200.
The switch can also be used with analogue VGA computers using compatible adapter cables.
Package Contents:
The LINDY Multi AV Input to HDMI Presentation Switch allows you to conveniently share content from a variety of devices to a HDMI display, such as a projector, using just a single cable.
Each of the connected devices is instantly converted and scaled to a HDMI signal, with the Presentation Switch automatically switching to use the most recently active device, making it ideal for use in class rooms, meeting/conference rooms and auditoriums.
For added convenience the Switch also features an Ethernet pass though port and a USB charging (5V 1.5A) port, handy for use in the absence of WiFi or for powering mobile devices.
In addition to the options given by the ports featured on the Switch, it is also possible to connect devices featuring different interfaces such as DisplayPort, DVI, MHL, Slimport using our range of AV converters.
The Presentation Switch can be used in conjunction with our range of long length HDMI cables and HDMI Extender's to reach even the most awkwardly located display or projector.
Package Contents:
Multi AV Input to HDMI Presentation Switch
Installation Bracket x 2
Installation Screws x 8
Desk Mount Hooks x 2
12V 2A Multi-Country Power Supply
LINDY Manual
Our Fibre Optic Hybrid DVI-D cables are the perfect solution for easily extending DVI digital signals over incredible distances.
Fibre-optic technology allows transmission distances that far exceed the maximum supported by standard copper only cables.
These cables feature H-PCF (Hard-Polymer Clad Fibre) glass fibres for sending digital display signals.
The Transmitter and Receiver modules are each equipped with standard DVI-D Male connectors for connecting to the source (e.g. DVI graphics card) and the display.
The modules are connected together by a fibre and copper solution.
Note: This product will work with most graphic cards & displays on the market but certain models do not output power through the DVI port.
For source devices and displays that don't output power through their DVI port, please use the Multi Country PSU's included.
Package contents:
DVI-D Hybrid Fibre Cable
2 x Multi Country PSU - 5V, 1.2A
LINDY Manual
Package Contents:
LINDY iPower Control 4
LINDY CD Including software and Manual
This user station sends KVM- and audio signals via Cat 5 RJ45 cables. It is used either on a Cat.5 KVM switch MC5/-IP as a user station or as an independent KVM extender with a matching Cat.5 KVM module.
The KVM switches MC5 and MC5-IP allow you to spatially separate admin workstations via Cat. 5 cables. This Cat.5 KVM module is already integrated in the KVM switch.
This 8 Port Splitter is part of the LINDY Cat.6 HDMI Distribution System, a range of modular products that work in combination to transmit uncompressed high definition video and audio over long distances using affordable Cat.6 network cable.
The range consists of a Transmitter, Receiver, Receiver/Extender and this 8 Port Splitter for use in digital signage, public display and other large scale video distribution applications. The System supports video signals from 480i up to 1080p at distances of up to 40m, as well as multi-channel digital audio and 3D signals.
This 8 Port HDMI Splitter allows up to 8 HDMI displays to be connected to a single source via Cat.6 cable and a compatible Receiver and Receiver/Extender unit. It is an ideal solution for multi screen digital signage or presentation installations that are spread out over a large site.
Please note: this splitter is only compatible with pre-existing receivers, 38109 and 38112