We use third party services that help us to improve and optimize our online experience. For the use of certain services we need your prior consent which can be revoked at any time. You can find further information on data protection in our privacy policy
Details
In order to optimise our website, we use services that collect and aggregate data and make it available to us as a statistical overview.
You are here: » Homepage
Our Fibre Optic Hybrid HDMI cables are the perfect solution for easily extending HDMI digital signals over incredible distances. Perfect for professional and home cinema situations they feature fibre-optic technology which allows transmission distances that far exceed the maximum supported by standard copper only cables.
These cables feature H-PCF (Hard-Polymer Clad Fibre) glass fibres for sending digital display signals. The transmitter and receiver modules are each equipped with standard HDMI Male connectors for connecting to the source and the display. The modules are connected together by a fibre and copper solution.
This cable also can be connected to DP graphics card output for use with HDMI Displays using Displayport to HDMI Adapter No.41068
HDMI - The Standard for Connecting HDTV
All Digital
No compression, no conversion, pure digital direct from the source as it was meant to be seen and heard.
The HDMI High Speed specification offers benefits over the previous version:
3D
The HDMI specification defines common 3D formats and resolutions for HDMI-enabled devices. The specification will standardise the input/output portion of the home 3D system and will specify up to dual-stream 1080p resolution.
4K
The HDMI specification will enable HDMI devices to support high-definition (HD) resolutions four times beyond the resolution of 1080p. Support for 4K will allow the HDMI interface to transmit content at the same resolution as many digital theatres.
Formats supported include:
3840 x 2160 @ 24Hz/25Hz/30Hz/60Hz
4096 x 2160 @ 24Hz
Content Type
Content Type enables, automated picture setting selection with no user intervention. The Content Type feature enables a display to auto-detect the correct viewing mode to match the Content Type it is receiving from a source device, and to switch modes when a new connected source is selected. Content Type supports content profiles for gaming, movie, photograph and text viewing modes.
Audio Formats
HDMI supports multi-channel digital audio on a single cable. It transmits all ATSC HDTV standards and supports 8-channel, 192kHz, uncompressed digital audio and all currently available compressed formats (such as Dolby Digital & DTS), HDMI 1.3 adds additional support for new lossless digital audio formats Dolby TrueHD and DTS-HD Master AudioTM with bandwidth to spare to accommodate future enhancements and requirements.
Amongst others the following formats are supported:
SA-CD
DTS-HD Master AudioTM
DVD-Audio
Dolby TrueHD
Dolby Digital / Plus
MPEG1 Layer I / II
MPEG2
MP3
AAC LC
DST / DSD (as used in SA-CD)
DTS
ATRAC
WMA Pro
MLP (as used in DVD-Audio)
Expanded Support for Colour Spaces
HDMI technology supports colour spaces designed specifically for digital still cameras. By supporting sYCC601, Adobe RGB and AdobeYCC601, HDMI-enabled display devices will be capable of reproducing more accurate life-like colours when connected to a digital still camera.
Package contents:
HDMI Hybrid Cable
2 x Multi country PSU
User manual
A KVM switch allows an operator to conveniently control and manage multiple devices, such as PCs and servers, from a single keyboard, mouse and display console.
The Lindy 2 Port DVI-I Single Link Dual Head, USB 2.0 & Audio KVM Switch is a compact solution for providing access and control over two DVI dual head equipped PCs from a single keyboard, mouse and two monitors.
Supports single link resolutions up to 1920x1200, the device can also be used with analogue VGA PCs using adapter cables with support for analogue resolutions up to 2048x1536. The dual head feature allows users to work across two displays if connecting 2 output ports from a graphic card to both PCs DVI inputs on the KVM switch.
The audio output ports on the main unit also allow users to connect headphones or speakers to add immersive 2CH audio and a microphone, while additional USB peripherals can be integrated with the 2 ports USB 2.0 hub. Both audio and USB hubs can be switched independently of the computers allowing you to print from one PC whilst working on another for example.
It supports True Transparent USB switching, an advanced USB emulation technology that allows the KVM to recognise specific keyboard & mouse models and emulate any of their associated special key and function information. This also provides enhanced support for combined use with KVM extenders.
The KVM switch features multiple switching options including push buttons on the unit and configurable hotkeys that provide simple, reliable control for the user, great for both professional and first time users.
Please Note: connection cables are not included.
The Lindy USB 3.1 Notebook Docking Station is a compact and multifunctional solution for connecting Notebooks to a range of interfaces including dual displays, using a single cable.
Featuring all the interfaces needed for a standard workstation, the Lindy USB 3.1 Type C Docking Station uses a single cable to connect to a Notebook to simultaneously provide dual monitor capabilities, power, gigabit ethernet, audio and a USB 3.1 SuperSpeed hub.
Using DisplayPort Alternate Mode via its USB Type C port the Docking Station enables the connection of two monitors to a compatible notebook via HDMI and/or DisplayPort. For added convenience DisplayPort to HDMI adapters are supported to allow the connection of identical HDMI monitors. When using a single monitor resolutions up to Ultra HD 4K 30Hz can be displayed on either interface, alternatively when using a dual monitor set up the maximum resolution is 1920x1200p 60Hz.
With support for USB Power Delivery (60W) the Docking Station is also able to provide power to a compatible Notebook via its Type C port.
The Docking Station features an integrated USB 3.1 SuperSpeed hub that provides two rear facing Type A ports and forward facing Type A and Type C ports. The front facing Type C port can be used for data transfer; there is no support for Power Delivery or Alternate mode, whilst the Type A port supports the USB Battery Charging Specification 1.2 for charging mobile devices.
A KVM switch allows an operator to conveniently control and manage multiple devices, such as PCs and servers, from a single keyboard, mouse and display console.
The Lindy Combo KVM Switch is a hardware solution that allows direct control of multiple computers using a single keyboard, mouse and VGA monitor. It's ideal for system administrators who want to control multiple computers or servers from a single, centralised location.
The switch occupies only a single 1U space in a 19” rack and supports screen resolutions of up to 12048x1536@60Hz, great for ensuring optimum clarity if used in digital media or graphic design scenarios. It provides 3 simple switching modes, via keyboard hotkeys, front panel buttons and On-Screen Display; setup and management options can be access only via the OSD.
A local console can be connected to the 2 USB and VGA ports on the rear panel while Daisy Chain VGA ports can be used to connect up to 8 Lindy Combo series switches in order to manage to up to 128 multi platform computers with security features and password access, perfect for large-scale control systems in transport hubs or surveillance centres. All the functions are accessible from the administrator through a simple to use On-Screen Display while LEDs on the front panel show the online and selected PC to ensure continuous control & monitoring.
PCs & connected KVM switches can be remove easily with hot plug support, allowing for maintenance to take place without the need for powering down all connected devices, essential within "always on" environments such as data centres or traffic management setups.
Computers or servers can be connected to the 8 host ports on the rear panel via dedicated KVM cables (not included).
These are available in different lengths and connections:
VGA & USB & USB - PS/2
1m 33770
2m 33771 33774
3m 33772
5m 33773
Switch on/off computers, routers, access points or any other electrical appliance with a maximum power consumption of 2000 W via the network. Switch access is by means of any Web browser - also password-protected where required.
The built-in measurement connection can be used to connect the temperature sensor to the device. This can be ordered from us under Article No. 32648. If used, the ambient temperature can then be displayed in the main menu and the switching menu and can be read out via SNMP.
Various end devices can be monitored via the built-in watchdog function. Either ICMP pings or TCP pings are sent to the device being monitored. If a response is not received to these pings within a certain time (the time and the number of attempts can both be configured), the matching power port is reset. Servers or NAS systems which have failed can be restarted automatically.
Upon request, you can also define timed switching operations using the supplied command line tool and e.g. .the Windows scheduler.
Note: Please refer to the Technical Information section to view the system requirements for using the video wall function
The LINDY 4K DisplayPort to 4 x HDMI Video Wall Processor is a high performance DisplayPort 1.2 Video Processor, with Video Wall, Duplicate, Extended and Expanderview/Eyefinity functions. The functions which are available are determined by your graphics card, number of displays, output resolution and Windows Display Settings.
Maximum resolution depends on the graphics card, monitors and Windows Configuration:
The NetSwitchBox 010 provides a relay contact which can be controlled over the network. Enclosed in a very compact housing, the whole unit weighs only 35 g- the ideal partner for monitoring projects. Comes with a removable 3x industrial terminal strip means installation is a breeze. Power adapter not included in the delivery. Suitable power adapter: LINDY - Art.No. 73803
IP Server Management Mode for Windows
Web Browser
Telnet
This device allows you to connect two serial devices to your network.
It features two 9 Way serial ports which can support RS-232, RS-422 and RS-485 equipment such as medical apparatus, industrial and manufacturing machinery, point of sale peripherals etc.
With this IP server multiple users can access the connected serial devices from anywhere on the local area network.
The HDMI over Gigabit Ethernet Extender System is capable of broadcasting 1080p Full HD over a standard gigabit network. It can operate as a standard extender in a single transmitter to single receiver configuration or can be used as a distribution system with a single transmitter to multiple receivers. In addition to extending Full HD 1080p HDMI signals the extender system can also be used to extend USB*, RS232 and IR remote control signals, meaning it can even be used as a KVM extender for remote control of a computer.
This Transmitter must be used with a HDMI over Gigabit Ethernet Receiver, just choose the number of receivers you need for your installation.
*Please Note: Only asynchronous USB devices such as keyboard and mouse are supported, mass storage, pendrives, printers and webcams cannot be supported
DisplayPort MST Hubs allow for the connection of multiple displays to a single DP source, to create larger workstation setups or larger scale DP distribution.
The Lindy DisplayPort to Quad HDMI MST/SST Hub with Video Wall Processor is a high-performance DP 1.2 MST and SST hub, with Video Wall, Duplicate, Extended and Expander View / Eyefinity functions.
To create a wide variety of display solutions, this processor groups the displays connected to port 1 and 2 together to create 1 single output, and then also apply this to the displays connected to 3 and 4.
This allows for the use of 4 different modes as detailed below. Maximum supported resolution can depend on the windows configuration, graphics card and connected display.
Video Wall Mode:
· Supports resolutions up to 3840x2160@60Hz using 4 displays connected together to create a single display, visualised as a 2x2 video wall.
· This is a great solution for digital signage in retail, transport hubs or trade shows.
For the system requirements and set-up instructions of certain graphics cards, please refer to the Lindy manual under the Downloads section of this page.
Duplicate Mode:
· Supports resolutions up to 1920x1080@60Hz per display, using up to 4 displays. This works similar to a standard DisplayPort splitter with SST functionality, duplicating the input signal onto each individual display. The processor can also split the signal across 2 individual 4K displays, with resolutions up to 3840x2160@60Hz.
· Using the grouped layout, resolutions up to 3840x1080@60Hz can be supported, duplicating the signal across the 2 separate groups (1+2) and (3+4).
These modes are great for use in security, surveillance and control installations.
Extended Mode:
· This mode supports resolutions up to 3840x1080@60Hz per display by using the grouped layout of displays 1+2 and 3+4. Content can be then shared across the 2 layouts simply by dragging the mouse across the displays.
This is useful for creating a large-scale office setup, or in graphic designs installations where users want to easily transfer content to another display or user.
Expander / Eyefinity Mode:
· This mode allows for the connection of 4 displays to create a multi-display workstation, viewed as a single display with resolutions up to 7680x1080@60Hz, with each display showing Full HD signals. Alternatively using 2 4K displays viewed as a single display, 7680x2160@30Hz can be viewed. This allows for the creation of a premium office or home workstation, or high-performance control set-ups in broadcasting and surveillance.
Multiple MST/SST hubs can be used to create even larger display setups, providing this cna be supported by the display driver and graphics card.
Please note: This active MST Hub requires the source or graphics card to support DP++ to provide dual-mode signals
Please note: this MST hub does not support output to 3 displays.
Please note: NVIDIA graphics cards require a display to be connected to the graphics card for control. Intel and AMD cards do not require this.
The switch board for TCP/IP networks for switch cabinet assembly on top-hat rails satisfying EN 50022 (35 x 7.5 mm.). Easily connect up to 4 potential-free channels to one switching load of 16A via the network. Password-protected switch access via a Web interface, via the serial interface, via buttons directly on the device, or via SNMP. Upon request, you can also define timed switching operations using the supplied command line tool and e.g. .the Windows scheduler.