• Extend an uncompressed HDMI/DVI signal to 8 displays at distances of up to 100m
• A HDBaseT Receiver is required for each display
• Supports HDTV resolutions up to 1080p with 24/36/48 bit colour depth
• Supports 3D, including 1080p 3D
• Supports 4K (3840x2160) @ 30Hz
• Supports LPCM, DTS Digital, DTS HD, Dolby Digital & Dolby True HD audio
• Allows the remote control of equipment via IR
• Connect using CAT6 RJ-45 cable
• Integrated 2 port 10/100 ethernet hubs in both the transmitter and receiver units
• IR Frequency range 33-50kHz
• Simple plug and play installation
• HDBaseT Alliance 5Play

Important: the HDBaseT RJ-45 ports on this splitter must never be connected to a LAN as this will cause the extender to fail

Perfect for home cinema or professional AV installations, the HDBaseT Splitter is capable of extending Full HD 1080p, including 3D to 8 displays at distances of up to 100m using a single CAT 5e/6/7 cable. The HDBaseT Splitter is also able to extend infrared signals, allowing AV equipment to be controlled up to 100m away. An integrated Ethernet hub also allows you to conveniently connect PC/MAC, NAS, Wireless Access Point and other network equipment over the same single CAT 5e/6/7 cable.

Package Contents

8 Port HDBaseT Splitter for HDMI

12V DC 4A PSU with UK power cable

IR Emitter with 3.5mm connector, ~1.4m

LINDY Manual

Please Note:

For larger distances up to 300m, we recommend our HDMI Fibre Optic Extender  

• Extend an uncompressed HDMI/DVI signal up to 100m
• To be used in conjunction with the LINDY Extender, 4 Port or 8 Port HDBaseT Splitters for HDMI
• Supports 4K (3840x2160) @ 30Hz
• Supports HDTV resolutions up to 1080p with 24/36/48 bit colour depth
• Supports 3D, including 1080p 3D
• Supports LPCM, DTS Digital, DTS HD, Dolby Digital & Dolby True HD audio
• Supports 3840x2160 24Hz YCbCr 4:2:2 12-bit BT.2020 / HDR10@24Hz Blu-ray UHD
• Allows the remote control of equipment via IR
• Connect using CAT6 RJ-45 cable
• Integrated 2 port 10/100 ethernet hubs
• Simple plug and play installation
• HDBaseT technology allows uncompressed full HD digital video, audio, 100BaseT Ethernet and more through a single LAN cable

Important: The HDBaseT RJ-45 ports must never be connected to a LAN as this will cause the extender to fail.

This HDBaseT Receiver is to be used with either the LINDY Extender, 4 Port or 8 Port HDBaseT Splitters and are perfect for home cinema or professional AV installations, capable of extending Full HD 1080p, including 3D to 8 displays at distances of up to 100m using a single CAT 5e/6/7 cable.

It is also able to extend infrared signals, allowing AV equipment to be controlled up to 100m away.

An integrated Ethernet hub also allows you to conveniently connect PC/MAC, NAS, Wireless Access Point and other network equipment over the same single CAT 5e/6/7 cable.

Please Note:

For larger distances up to 300m, we recommend the LINDY HDMI Fibre Optic Extender.

Package Contents

HDMI Extender C6 100m Receiver

5V DC 2A Multi County PSU (with Euro, US, UK & Australian/China AC connectors)

IR Receiver with 3.5mm connector, ~1.4m

LINDY Manual

• Extend an uncompressed HDMI/DVI signal to 4 displays at distances of up to 100m
• A HDBaseT Receiver is required for each display
• Supports HDTV resolutions up to 1080p with 24/36/48 bit colour depth
• Supports 3D, including 1080p 3D
• 4K 3840 x 2160p24 support
• Supports LPCM, DTS Digital, DTS HD, Dolby Digital & Dolby True HD audio
• Allows the remote control of equipment via IR
• Integrated 2 port 10/100 ethernet hubs in both the transmitter and receiver units
• IR Frequency range 33-50kHz
• Simple plug and play installation
• HDBaseT Alliance 5Play

Important: the HDBaseT RJ-45 ports on this splitter must never be connected to a LAN as this will cause the extender to fail

Perfect for home cinema or professional AV installations, the HDBaseT Splitter is capable of extending Full HD 1080p, including 3D to 4 displays at distances of up to 100m using a single CAT 5e/6/7 cable. The HDBaseT Splitter is also able to extend infrared signals, allowing AV equipment to be controlled up to 100m away. An integrated Ethernet hub also allows you to conveniently connect PC/MAC, NAS, Wireless Access Point and other network equipment over the same single CAT 5e/6/7 cable.

Package Contents:

4 Port HDBaseT Splitter for HDMI

12V DC 4A PSU with UK power cable

IR Emitter with 3.5mm connector, ~1.4m

LINDY Manual

Please Note:

For larger distances up to 300m, we recommend our HDMI Fibre Optic Extender

• Split a single UHD HDMI signal from one source device to two UHD displays
• Supports resolutions up to 4K2K @30Hz including 3D 1080p
• Supports 7.1 channel of LPCM, Dolby TrueHD and DTS-HD Master Audio digital audio signals
• Supports digital video formats in deep colour mode at up to 36 bit
• 2 year warranty

The LINDY HDMI 1.4 4K UHD splitter is capable of displaying resolutions up to 3840 x 2160. It is ideal for today's 1080p 3D signals and is future proofed for many years to come.

Note on using DVI equipped devices with this HDMI splitter:

To connect devices equipped with DVI connections, you can either use modular DVI/HDMI adapters or DVI/HDMI adapter cables. Please be aware that DVI is a "video only" interface, audio signals are not supported when using DVI devices.

Package Contents:

2 Port HDMI 4K UHD Splitter

Multi-Country PSU

User manual

• Supports resolutions up to 4K2K@30Hz including 3D 1080p
• Supports 7.1 channel of LPCM, Dolby TrueHD and DTS-HD Master Audio digital audio signals
• HDCP 2.2 compliant for trouble free operation
• Supports cable distances up to 20m (10m in, 10m out)
• 2 year warranty

This state of the art HDMI 2.0 4K UHD splitter is capable of displaying resolutions up to 3840 x 2160. It is ideal for today's 1080p 3D signals and is future proofed for many years to come.

Package Contents:

2 Port HDMI 2.0 4K UHD Splitter

Multi-Country PSU

User manual

• Split a single HDMI 2.0 source across 4 HDMI displays
• Supports resolutions up to 4K@60Hz 4:4:4, with additional support for HDR
• HDCP 2.2 support for enhanced compatibility
• EDID Management for hassle free installation
• 2 Year Warranty

The Lindy 4 Port HDMI 2.0 18G Splitter is a compact, high quality solution for distributing HDMI 2.0 18G signals across multiple displays from one source device. With support for resolutions up to 4K 60Hz 4:4:4 8bit, this splitter is great for creating eye-catching digital signage in retail scenarios, showing high quality video in different rooms in medical facilities or ensuring audiences do not miss any of the action in dual display sports bars. Additional support for High-Dynamic Range ensures video content can be seen with enhanced brightness, superior contrasts and a much wider colour gamut, for more lifelike colour.

HDCP 2.2 support ensures there are no issues with a variety of 4K content when connected to source devices including set top boxes, Blu-Ray players and 4K HDR media players, while a smart EDID management switch on the unit provides maximum compatibility with the display. The splitters durable, compact design also ensures the unit can be installed discreetly, ensuring there is no distraction from the content on screen.

• Converts and Scales 8 AV Inputs to resolutions up to Full HD 1080p
• Accepts HDMI, VGA, Component & Composite video signals
• Simultaneous video output via VGA and 2 x HDMI
• Controlled by IR, OSD, RS-232, Telnet and Web GUI (IP/Ethernet)
• 2 Year Warranty

Featuring 8 AV inputs which can be converted and scaled to resolutions up to Full HD 1080p this AV Conversion Switch is an ideal addition to any meeting or conference room, lecture hall or auditorium. Any of the available inputs (3 x HDMI, 3 x VGA & Audio, Component Video & Audio and Composite Video & Audio) can be simultaneously shown across display equipment connected to each of the outputs (2 x HDMI and VGA). These three outputs provide compatibility with both current and legacy AV displays and can be combined with Lindy HDMI or VGA extenders  to reach remotely loCat.ed displays.

In addition to its video capabilities the AV Conversion Switch also features Digital to Analogue and Analogue to Digital conversion and can also embed analogue audio to HDMI video signals. With simultaneous audio output via 3.5mm stereo socket and Coaxial SPDIF the Switch can be directly connected to almost any AV Receiver in the market, whilst for further flexibility one of the HDMI outputs can also be used for audio.

The Switch features remote configuration and control via RS-232, Telnet and Web GUI as well as locally by OSD and IR making it simple to integrate within automated installations.

• Supports resolutions up to 4K2K@30Hz including 1080p 3D
• Supports 7.1 channel of LPCM, Dolby TrueHD and DTS-HD Master Audio digital audio signals
• HDCP 1.4 compliant
• Supports cable distances up to 20m (10m in, 10m out)
• 2 year warranty

This compact 4K HDMI UHD splitter is capable of displaying resolutions up to 3840 x 2160, four times the resolution of HD 1080p 30Hz, future proofed for many years to come. It is also backwards compatible with previous HDMI versions supporting 1080p/1080i/720p/720i as well as 1080p 3D.

The LINDY HDMI splitters are ideal for use with source devices such as SKY HD Boxes, PlayStation 3 and 4, Xbox360, Xbox One, Blu-ray players and many more. The output ports are compatible with LED, LCD, Plasma HDTV displays as well as projectors and computer monitors.

Note when using DVI equipped devices with this HDMI splitter:

To connect devices equipped with DVI connections, you can either use modular DVI/HDMI adapters or DVI/HDMI adapter cables. Please be aware that DVI is a "video only" interface, audio signals are not supported when using DVI devices.

Package Contents:

HDMI Splitter, Compact

USB Type A to micro B cable

• Split a single UHD HDMI signal from one source device to two UHD displays
• Supports resolutions up to 4K2K @30Hz including 3D 1080p
• Supports 7.1 channel of LPCM, Dolby TrueHD and DTS-HD Master Audio digital audio signals
• Supports digital video formats in deep colour mode at up to 36 bit
• 2 year warranty

The LINDY HDMI 1.4 4K UHD splitter is capable of displaying resolutions up to 3840 x 2160. It is ideal for today's 1080p 3D signals and is future proofed for many years to come.

Note on using DVI equipped devices with this HDMI splitter:

To connect devices equipped with DVI connections, you can either use modular DVI/HDMI adapters or DVI/HDMI adapter cables. Please be aware that DVI is a "video only" interface, audio signals are not supported when using DVI devices.

Package Contents:

4 Port HDMI 4K UHD Splitter

Multi-Country PSU

User manual

• Allows you to split a single UHD source to 4 UHD displays
• Supports video resolutions up to 4K2K@60Hz 8 Bit including 3D 1080p
• Supports 7.1 channel of LPCM, Dolby TrueHD and DTS-HD Master Audio digital audio signals
• HDCP 2.2 compliant for use with the latest AV equipment
• 2 year warranty

This state of the art 4K HDMI 2.0 18G splitter is capable of displaying resolutions up to 3840 x 2160 to one UHD signal in and to 4 UHD signals out. The splitter is also HDR (High Dynamic Range) compatible to reproduce a greater dynamic range of luminosity when used with imaging and photography.

With full support for HDCP 2.2 and HDMI 2.0, you can be sure that this product is fully future proof and ready for the new and demanding audio and video signals on the market.

The built in EDID switch panel allows you to select the resolution setting to avoid incompatibilities with different brands of monitors.

Package Contents:

4 Port HDMI 18G Splitter

5V Multi Country PSU

LINDY QIG

• Allows you to split a single UHD source to 8 UHD displays
• Supports video resolutions up to 4K2K@60Hz 8 Bit including 3D 1080p
• Supports 7.1 channel of LPCM, Dolby TrueHD and DTS-HD Master Audio digital audio signals
• HDCP 2.2 compliant for use with the latest AV equipment
• 2 year warranty

This state of the art 4K HDMI 2.0 18G splitter is capable of displaying resolutions up to 3840 x 2160 to one UHD signal in and to 8 UHD signals out. The splitter is also HDR (High Dynamic Range) compatible to reproduce a greater dynamic range of luminosity when used with imaging and photography.

With full support for HDCP 2.2 and HDMI 2.0, you can be sure that this product is fully future proof and ready for the new and demanding audio and video signals on the market.

The built in EDID switch panel allows you to select the resolution setting to avoid incompatibilities with different brands of monitors.

Package Contents:

8 Port HDMI 18G Splitter

5V Multi Country PSU

LINDY QIG

• Distributes content from a single HDMI source across 16 HDMI displays
• Supports resolutions up to 4K@60Hz, with additional support for HDR
• HDCP 2.2 for enhanced compatibility with 4K content
• Smart EDID Management control to ensure the optimum video performance
• 2 year warranty

HDMI splitters are high quality solutions for distributing identical content simultaneously across several HDMI displays.

The Lindy 16 Port HDMI Splitter is a professional solution for distributing high quality HDMI content simulateneously across 16 seperate displays, when connected to a single HDMI source such as media players, PCs or set top boxes.

With support for full 4K@60Hz resolutions and HDR, content can be viewed in superior quality with a wider colour gamut and greater contrast. The splitter is perfect for creating eye-catching digital signage in retail, hospitality, conference rooms, transport hubs or impressive residential installations. HDCP 2.2 support also ensures seamless playback of 4K and Full HD content including video games, Blu-rays and on-demand video.

The splitter also includes a smart EDID dip switch for ensuring the optimum resolutions possible are shown on the connected displays.