Christmas Opening Times
Friday 22nd last order processing 13:30 CET
Monday 25th December   CLOSED
Tuesday 26th December CLOSED
Wednseday 27th December CLOSED
Thursday 28th December OPEN 9:00 last order processing 13:30 CET
Friday 29th December CLOSED
Monday 1st January CLOSED
For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
Video Wall mode supports screen arrays from 1x2, 2x2 to 8x8
HDMI signal extension over a Gigabit LAN
Ability to cascade up to 3 layers of network switches
Features Video Tearing & Display Bezel correction
HDMI with HDCP support, 480i up to 1080p60@8bit supported, not 3D capable
Transmitter and Receiver units sold separately
2 Year Warranty
Please Note: Because of bandwidth requirements these video broadcasts should use their own dedicated network connections or should be used in a separate port based VLAN.
This HDMI over Gigabit IP Video Wall Extender allows you to distribute an HDMI signal up to 1080p via Ethernet network to multiple displays for applications such as digital signage, public display and large scale presentations. These extenders convert the HDMI signal to IP broadcast signals. Network devices can be used to distribute the signals. These extenders support 1-to-1 (Unicast), 1-to-many (Multicast), many-to-many (Multicast) and video wall (1x2 up to 8x8) configurations, with Transmitters and Receivers available separately to give you the maximum flexibility in your installation.
In Unicast mode a Transmitter is used with a single Receiver, this can be via a direct connection or via a Gigabit network. When using a Gigabit network it is possible to simultaneously use up to 4 pairs of Transmitter and Receiver, by setting different pairing codes on each Transmitter and Receiver pairing.
In Multicast mode a Transmitter can be connected to up to 1000 Receivers via a Gigabit network with hubs supporting IGMP & Snooping functions, or via a dedicated Gigabit network. In addition, up to 4 Transmitters may be used simultaneously on a single network, each connected to up to 1000 Receivers, again by setting different pairing codes on each Transmitter and Receiver group pairing.
In video Wall mode a Transmitter is connected to multiple Receivers via a Gigabit network with hubs supporting IGMP & Snooping functions and configured by Web GUI into a video wall. It is possible to create a video wall from 2x1, 2x2 up to 8x8, all of which can be duplicated multiple times across a network.