"This site uses cookies to provide and improve your shopping experience. By continuing to use this site, you agree to accept these cookies. For more information, please click here."
4 pieces of EVA foam with single sided self-adhesive
Customizable - cut to size as required
Ideal for installing 7mm or 7.5mm HDDs into standard 2.5” hard drive enclosures designed for 9.5mm high HDD
Colour: black
These Self-adhesive Foam Pads fill the space between a drive and the drive enclosure, cutting down on the possible range of movement of a drive and therefore reducing the risk of damage to the drives SATA connection.
SSD/HDDs vary in depth - either 7 or 7.5mm - leaving a relatively large amount of space for them to move in a 2.5" drive enclosure or housing.
Overtime, everyday knocks or movement can fatigue an unsecured drive's connection to the rest of the PC, causing the connection to fail and - in a worse case scenario - damage the SATA connection pins making the drive virtually inoperable.
By filling the gap between the drive and the housing with a foam pad you can cushion the drive and help reduce the risk of damage to it or its connections.
Additional benefits of installing these pads include some reduction in vibration transmissions from HDDs, helping cut down on general running noise. Dimensions (each piece) 10x9.5x2.5mm (WxDxH).
On board 4 Pin power connector to provide 12V DC power the FireWire bus (Y-type splitter power cable included)
Standard and Low Profile PC Back Plates included
TI chipset - ideal for music and pro audio applications
Software Compatibility: Windows Vista/2008 /7 /8 /8.1 /10 and Mac
This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service.
The finger contacts are gold-plated to limit oxidisation and extend the life of the card. It features a Texas Instrument chipset which is recommended for music and digital audio applications.
