This high quality toolkit features 6 different tamper proof torx drivers for electronic, electrical or general purpose precision use. For comfort and convenience, the screwdrivers feature larger than standard handles with a rotating grip for ease of use. Each screwdriver is clearly marked with the driver size.
Converts M.2 (NGFF) PCIe SDD for use in PCIe x4 slots
Supports PCIe Gen3 and Gen2 M.2 NGFF 110mm, 80mm, 60mm, 42mm form factors
Compatible with NVMe and SATA based SSDs
M.2 NGFF type 22110-D5-M connector on board
2 Year Warranty
The LINDY M.2 SSD to PCIe Adapter Card allows high performance PCIe based SSDs to be installed in a typical PCIe x4 slot commonly found on desktop PCs and servers. Using NVMe technology that was built specifically for SSDs allows super fast connection speeds. Supporting dual sided SSD modules with 1.5mm component height and a wide range of lengths allows most modules to be installed with ease.
Please note: SATA Based SSD Modules are not compatible with this adapter card. To boot from NVMe SSDs you will need appropriate BIOS support.
Allows you to add extra hard drive storage (hard drive is not included)
Designed for use with 2.5" SATA hard drives up to 9.5 mm high
SATA ODD Slim SATA 13 Pin Way connector to SATA HDD 22 Way connector
SATA III / 6Gbps
Fully integrates into your laptop or notebook, no cables, external power supplies or software drivers required
Stainless steel & black plastic finish
Dimensions: 128 x 129 x 9.5mm (WxDxH); fits most standard optical drive bays
Note: This caddy does not support 3.3V HDDs/SSDs and is designed to fit most 'standard' and 'universal' CD/DVD/Optical drive bays. Due to variations in laptop design, compatibility with all machines cannot be guaranteed.
Allows you to add extra storage to your machine (SSD is not included)
Designed for use with mSATA or SATA based M.2 SSDs
SATA ODD Slim SATA 13 Pin connector to mSATA and M.2*
Dimensions: 128 x 129 x 12.7mm (WxDxH); fits most standard optical drive bays
The LINDY Slim ODD Caddy for mSATA and M.2 SSD allows you to install M.2 and mSATA SSDs* in your notebook using the optical drive bay. This in turn can be used to add extra storage or dual boot capabilities to your computer.
Fully integrates into your laptop or notebook, no cables, external power supplies or software drivers required.
*If both M.2 and mSATA SSDs are installed at the same time, only M.2 will work.
Note: This caddy does not support 3.3V HDDs/SSDs and has been designed to fit most 'standard' and 'universal' CD/DVD/Optical drive bays. Due to variations in laptop design, compatibility with all machines cannot be guaranteed.
RAID Adapter for connecting two SATA Drives to a host computer
Supports SATA I (1.5Gbps) SATA II (3Gbps) SATA III (6Gbps), RAID 1, RAID 0, SPAN (Big Drive) and PM (2Drives) mode
Automatic "Rebuild" function, Native Command Queue (NCQ) and auto-negotiation
100% OS-transparent supports PC, Mac and Linux (driver not required for modern OS)
2 years warranty
The LINDY 6 Gbps Hardware RAID Adapter allows you to connect two SATA hard drives to a single host port. The drives can then be set up in a variety of RAID configurations via the adapter jumpers to appear individually or as a single drive.
Note: Changing the RAID mode will lead to a reconfiguration of the disk array, erasing all data on the hard drives. Where possible, it is advised you backup any critical data before performing this task.
Speed: SuperSpeed (5Gbps), High Speed (480Mbps), Full Speed (12Mbps) and Low Speed (1.5Mbps)
Compliant with PCI Express Rev. 2.0 specification
Compliant with USB 3.0 Rev. 1.0 specification
2 year warranty
With this 1 Port USB 3.0 ExpressCard you can easily upgrade your computer, adding additional SuperSpeed USB 3.0 ports with transfer speeds up to 5Gbps. Ideal for connecting extra USB 3.0 peripherals such as external storage, or legacy USB 2.0/1.1 printers and scanners to your laptop or notebook. A built in DC connector allows you to connect an external power supply when using USB 3.0 devices with high power requirements.