For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
Supports high VGA image quality up to 1920x1200 at distances of up to 300m
Connection via low-cost network cable (Cat.5e/6, UTP, RJ45)
System administrators will find the KVM Extender Combo 300 firmly to their liking:
The built-in KVM switch can be used to switch to the local terminal on the remote workstation.
A local console can also be connected to the remote-control transmitter/KVM switch.
Supports USB and PS/2 mouse and keyboard connections in any combination, also mixed
With electronic image improvement for RGB skew/runtime compensation, focus control, brightness
OSD for configuring hotkeys, password protection, auto-logout etc.
KVM Extender for distances of up to 300m also at high VGA resolutions
The Cat.5 KVM extender Combo 300 provides everything a system admin could ask for:
Real Time KVM access to all remote systems
AKVM switch integrated in the transmitter switch on the local side (KVM switch) allows a console to be connected for local work.
KVM switch built into the receiver in the remote admin's office allows work to be alternated between the local workstation and KVM switch remote control .
Digital image optimisation and adjustment to Cat. 5 transmission cable from receiver console via OSD. Run-time compensation (skew compensator for that of RGB components), image focus and brightness adjustment
Access to the workstation terminal and remote access can be toggled via keyboard hotkey or button on the receiver unit.
Simultaneous working on the remote-controlled KVM switch/PC is possible from both consoles. The active access is released for the other console after a short timeout. Can be configured between 0 -30 seconds.
Up to 300 m at 1920 x 1200 with low-cost Cat.5 network cable
Compatible with all standard operating systems, no driver installation necessary, uses standard USB HID drivers for USB connection
PS/2 and USB mice and keyboards and associated connections can be used in any combination, thereby supporting standard 5-button mice and keyboard functions offered by the operating systems (only USB HID devices in the USB ports, no other USB devices, etc).
Easy installation and control: Just connect the cables: Connect monitors, mice and keyboards and PC/KVM switch and route any previously installed Cat 5 network cable - digitally supported image optimisation - and you're done.
Solid metal housing
2 year LINDY manufacturer's warranty
You can achieve the best image quality at very large distances by connecting transmitter and received directly via Cat. 5e/UTP installation cables. High-quality LINDY Cat. 6 S/FTP patch cables can also be used up to 100m. Additional plug connections or the use of shielded STP/FTP installation cables or flexible patch cables can reduce the picture quality and reduce the maximum distance.
NOT for use in LAN or Ethernet!! Connection via a dedicated RJ45 cable. Additional plug connections diminish the picture quality!
Connections, receiver unit/transmitter unit
2x PS/2 sockets and 1xUSB type A sockets for mouse & keyboard + 1x HD-15 socket for monitor
1x HD-15 socket for connection of local PC/KVM switch, 3-in-1 KVM system cable included
RJ45 socket for Cat.5e cables for connecting transmitter and receiver
Connection for supplied power supply unit
2 power supplies included (5V DC), with detachable plugs for Euro, UK, US and AUS.
2 KVM cables included, see above.
Power consumption of transmitter approx. 1.5 W, receiver approx. 3.5 W (with 1080p video transmission)
Transmitter/Receiver dimensions: 13 x 7 x 2.8 cm (WxFxH),