9x 19" powerboard
The sockets are rotated 35° to allow angled connectors to be inserted without any problem.

• 9 x Schuko earthing-contact type socket, rotated 35°, with Nickel-plated Nickel-plated protective earth contacts
• Distortion-resistance profile through the use of high-quality anodised aluminium
• Connection cable (H05VV-F 3G1.5 black) with protective contact-angled connector, approx. 2.0m
• 1 HU
• Practical stainless steel attachment bracket for attachment in 4 positions, at intervals of 90°

7x 19" powerboard with overvoltage protection and On/Off switch.
The sockets are rotated 35° to allow angled connectors to be inserted without any problem.

• 7 x Schuko earthing-contact type socket, rotated 35°, with Nickel-plated Nickel-plated protective earth contacts
• Overvoltage protection
• 2-pin backlit On/Off switch, 16A
• Distortion-resistance profile through the use of high-quality anodised aluminium
• Connection cable (H05VV-F 3G1.5 black) with protective contact-angled connector, approx. 2.0m
• 1 HU
• Practical stainless steel attachment bracket for attachment in 4 positions, at intervals of 90°

8x 19" IEC powerboard

• 8 x sockets for non-heating appliances (320")
• Distortion-resistance profile through the use of high-quality anodised aluminium
• Connection cable (H05VV-F 3G1.5 black) with protective contact-angled connector, approx. 2.0m
• 1 HU
• Practical stainless steel attachment bracket for attachment in 4 positions, at intervals of 90°

Power socket board for 19 inch systems for monitoring electrical devices via a TCP/IP network. The IPowerMeter measures current, phase angle, power factor (cos phi), frequency, active-, apparent- and reactive power and indicates the consumed energy in two independent meters. All of the readings are indicated on the device itself and can be accessed via  TCP/IP network.

• Measuring current, voltage, phase angle, power factor (cos phi), frequency, active-, apparent and reactive power (total value for all connected devices)

• Two energy meters: One meter counts continuous from commissioning, another meter can be reset.

• All values are also indicated via a lit 2-row display

• Compact size, 19" 1U, 8 IEC 320 C13 outputs

• Dynamically assign an IP address via DHCP or manual assignment of a fixed IP address.

• Firmware update via Ethernet

• SNMP support (SNMPv1, SNMPv2c)

• SNMP traps (SNMPv1, SNMPv2c)

• Syslog support

• Access protection via IP access control

• Access protection via optional HTTP password

• Basic and flexible configuration via Web browser, Windows program  GBL_Conf or Linux program gblc

• Designed and manufactured in Germany

For guiding patch cables to patch panels in the area in front of the 19" frame 5 vertical plastic clips hold the cables in their position

For routing patch cables to patch panels in the area in front of the 19" frame

Metal cable guiding clip made from polished stainless steel for improved cable organisation in upright or wall-mounted cabinet

Metal cable guiding clip made from polished stainless steel for improved cable organisation in upright or wall-mounted cabinet

Metal cable guiding clip made from polished stainless steel for improved cable organisation in upright or wall-mounted cabinet

50 pieces assembly screws for 19" components including black plastic disk shims and cage nuts. Fit all current LINDY upright cabinets, wall-mounted enclosures and open rack panels.

For covering disruptive gaps between mounted 19" components