For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
This product has been discontinued and replaced by Part No 38209.
Extends HDMI 2.0 compatible signals up to 100m using HDBaseT 2.0 Technology
Supports resolutions up to 4096/3840x2160p60, 1080p120 and 1080p 3D
HDCP Pass-through: Supports HDCP 1.4 and HDCP 2.2
Use a single cable to extend HDMI, USB, RS-232, IR, Ethernet and Audio Signals
Integrated Power over HDBaseT functionality requires only a single power supply
2 Year Warranty
Please Note: This Transmitter requires a C6 HDMI 2.0 4K Extender Pro receiver, it will not work with HDBaseT v1.0 products
Using HDBaseT 2.0 Technology the LINDY C6 HDMI 2.0 Extender Pro allows you to send HDMI (up to 4K 60Hz), USB, Ethernet, RS-232, Digital & Analogue Audio and IR signals up to 100m using a single high quality Cat.6/Cat.7 RJ45 cable. For added convenience and to enable discreet installation of the Receiver unit the Extender supports PoH (Power over HDBaseT) allowing a single power supply to be used with the Transmitter to power both units. For best results and especially longer distances, we recommend using solid core/structured cabling.
Support for bi-directional IR control signals (30-50kHz) allows a source to be controlled from the remote end of the installation or a Display to be controlled from the local end. In addition there is support for simultaneous bi-directional digital audio (Coaxial SPDIF) extension as well as analogue audio extension from the transmitter to the receiver, providing the flexibility to use multiple audio sources in combination with or instead of the audio embedded with the video signal.
USB 2.0 extension allows the connection of two basic USB devices such as Keyboard, Mouse, Pen drive or Printer (Webcams are not supported!) to be connected to the extender, giving access to or control of a remote PC.
January 2016: ARC functionality is not currently available, a future FW update will enable this functionality
C6 HDMI 2.0 Extender Pro Transmitter
48V Power Adapter
C13 Mains Power Cable
IR Emitter Cable 1.4m
LINDY User Manual
Supports HDBaseT 2.0 Technology up to 100m using CAT6/7 Cable or 90m using CAT5e Cable
Compatible with HDMI 2.0 and Fully Compliant with HDMI 1.4