Description
This product has been discontinued and replaced by Part No 38049.
The HDMI 1.3b Switch Duo offers maximum convenience when connecting multiple HDMI sources and displays. It has 4 HDMI input ports and 2 HDMI output display ports. Each of the 4 sources can be directed to any of the 2 displays using the supplied remote control. It's an ideal solution for multiple HDMI distribution and ideal for use in retail, training and public display applications.
- HDMI switch which connects up to 4 HDMI/DVI devices to one of 2 HDTV displays or projectors
- Supports digital video formats in deep Color mode at up to 36 bits and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio
- Each input can be sent to one of the 2 connected display devices
- Infra red remote control for switching between devices and displays
- Re-times, compensates and regenerates the HDMI input signal so that the output signal can be transmitted distances of up to 20m (10m in, 10m out); can be used with our or
- Supports HDTV resolutions of up to 1080p and DVI resolutions of up to 1920 x 1200
- HDMI 1.3b, HDCP and 3D compliant
- Sturdy metal casing - ideal for industrial use
- Dimensions: 170 x 80 x 25mm (WxDxH)
A full range of , and are also available.
Technical details
- HDMI 1.3b, HDCP 1.1 and DVI 1.0 compliant
- Supports HDTV resolutions: 480i, 576i, 480p, 576p, 720p, 1080i and 1080p
- When used with computers, supports DVI-D resolutions of up to 1920 x 1200
- Supports multi-channel digital audio: PCM2, PCM5.1, PCM7.1, Dolby5.1, DTS5.1, DTS5.1, DD+, D-TrueHD & DTS-HD
- Input Ports: 4 x HDMI Female
- Output Ports: 2 x HDMI Female
- Device Selection by push button or infra-red remote control
- Supports cable runs of up to 20m (10m in, 10m out)
- LEDs to indicate channel selection and power
- Supplied with infra-red remote control and battery (CR2025)
- 5V DC, 1.5A Multi Country PSU included
Note on using DVI equipped devices with the HDMI 4x2 Switch Duo
To connect devices equipped with DVI connections, you can use either modular DVI/HDMI adapters or DVI/HDMI adapter cables. Be aware that DVI is a "video only" interface - no audio signals will be switched by the HDMI Switch Remote when using DVI devices!
Why choose LINDY HDMI 1.3b devices?
Higher speed: HDMI 1.3 increases its single-link bandwidth to 340 MHz (10.2 Gbps) to support the demands of future HD display devices, such as higher resolutions, Deep Colour and high frame rates. In addition, built into the HDMI 1.3 specification is the technical foundations that will let future versions of HDMI reach significantly higher speeds
Deep Colour: HDMI 1.3 supports 10-bit, 12-bit and 16-bit (RGB or YCbCr) colour depths, up from the 8-bit depths in previous versions of the HDMI specification, for stunning rendering of over one billion colours in unprecedented detail
Broader colour space: HDMI 1.3 adds support for “x.v.Color™”, which removes current colour space limitations and enables the display of any colour viewable by the human eye
New mini connector: With small portable devices such as HD camcorders and still cameras demanding seamless connectivity to HDTVs, HDMI 1.3 offers a new, smaller form factor connector option
Lip Sync: Because consumer electronics devices are using increasingly complex digital signal processing to enhance the clarity and detail of the content, synchronization of video and audio in user devices has become a greater challenge and could potentially require complex end-user adjustments. HDMI 1.3 incorporates automatic audio synching capabilities which allow devices to perform this synchronization automatically with total accuracy
New HD lossless audio formats: In addition to HDMI‘s current ability to support high-bandwidth uncompressed digital audio and all currently-available compressed formats (such as Dolby® Digital and DTS®), HDMI 1.3 adds additional support for new lossless compressed digital audio formats Dolby TrueHD and DTS-HD Master Audio™