For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
Also supports large cable lengths, e.g. LINDY 25m active cable No.41054 and the LINDY HDMI hybrid cable up to 100 m
Also supports HDMI switchers on the side of the signal sources
4 outputs for additional optional IR emitters (contains 1 emitter)
2 year LINDY manufacturer's warranty
This IR transmitter kit is ideal if your HDMI signal sources and change-over switches are hidden in an AV rack or are spatially separated or if there are problems with HDMI CEC transmission. Or if you want to continue only using the original remote controls of the individual devices.
Attach the IR sensor to your display in an unobtrusive spot. The sensor then feeds the IR signal to the HDMI injector, the HDMI cable/extender sends the signal to the extractor (splitter) where it is split again before being sent to the HDMI signal sources via an IR emitter.
IR over HDMI Injector
IR over HDMI Splitter
IR Receiver, 2m x 1
IR Emitter, 1.4m x 1
The transmitter kit supports HDMI switchers connected downstream between the extractor (splitter) and the HDMI signal sources.
These switchers and several signal sources can also feed IR signals via the long HDMI cable/extension section.
You only need to place IR emitters in the right places.
The IR transmission via the HDMI cable replaces the original CEC signal
IR frequencies supported 20-60kHz
Operating temperature: approx. 0 to 60°C
Storage temperature: approx. -20 to 70°C
IR via HDMI transmitter kit comprising
an IR sensor,
an HDMI injector,
an HDMI ejector (splitter) and
an IR emitter.
IR sensors and IR emitters
One of each included in delivered items
each with a cable length of approx. 1.4 m and 3.5 mm attaching plug
Extension possible with standard audio cable with 3.5 mm connectors
Short adapter cable HDMI connector on HDMI socket with 3.5 mm socket for feeding the IR signal from the IR sensor
The fed-in IR signal and not the original HDMI CEC signal is sent over the HDMI cable instead; the CEC is no longer available!
HDMI extractor (splitter)
Short adapter cable HDMI connector to HDMI socket and with 4 x 3.5 mm sockets
The IR signal fed in from the injector is emitted to the IR emitter cables via the 3.5 mm sockets. Includes an IR emitter cable, for other optional IR emitter cables, see No. 38016
Write a review