For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
High strength USB 2.0 charging cable for smartphones, tablets and other Type C devices
Reinforced with aramid and HMPE fibres to provide a high strength cable solution
Optimized strain relief to withstand over 100,000 bending cycles
Supplied with a complimentary hook-and-loop tie wrap to avoid cable tangling
10 year warranty
Lindy’s range of reinforced USB charging cables provide a reliable and effective charging solution for a variety of devices, while avoiding the common issues of standard or cheaper charging cables such as cable fraying, snapping and low charging speeds.
With aramid fibres, commonly used in aerospace and military applications, housed within the cable itself, these cables possess an optimised high strength quality not seen with standard USB cables, and combined with HMPE fibre braiding, a material well used for fishing ropes and lines, common cable faults from daily use are no longer an issue. The specialised Lindy strain relief also enhances the durability of these cables, tested to bend over 100,000 times before failure, a revolutionary resistant yet flexible solution to preventing splitting and snapping.
This range of USB 2.0 to Type C cables provides a fast reliable charge to smartphones, tables and other Type C devices, utilising not only a reinforced shielding and jacket structure but also an optimum internal build including copper shielding, to support high quality, fast charging.
The cable also comes supplied with a Lindy hook-and-loop tie wrap, providing a neat, handy solution to avoid the cable tangling.
Connector A: USB Type A Male
Connector B: USB Type C Male
Housing Material: TPE
Connector Plating: Nickel
Pin Construction: Copper
Pin Plating: Gold Plated
Dimensions (approx.) WxDxH:
USB Type A: 15x46x7mm (0.59x1.81x0.28in)
Type C: 12x39x6mm (0.47x1.54x0.24in)
Length: 3m (9.84ft)
Standard: USB 2.0
Jacket Diameter: 3.5mm (0.14in)
Jacket Material: TPE with HMPE Braid
Conductor Material: Copper
Conductor Gauge: 28AWG
Shielding: Copper Shielding
Supported Bandwidth: 480Mbps
Power Delivery: -
Maximum Resolution: -
Nominal Attenuation: 0.5Mhz – 400Mhz < 5.8db
Minumum Bend Radius: 35mm (1.38in)
Operating Temperature: 0°C - 60°C (32°F - 140°F)
Storage Temperature: 0°C - 70°C (32°F - 158°F)
Packaging Type: Polybag
Warranty (Years): 10
Certificated: RoHS and REACH
This product is also available in other lengths
36875 - 0.5m (1.64ft)
36876 - 1m (3.28ft)
36877 - 2m (6.56ft)
36878 - 3m (9.84ft)
Write a review