For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
Individually control the power of up to 12 servers or workstations via LAN (Local Area Network), WAN (Wide Area Network) or the internet
Measures the throughput power of each bank of six devices
User friendly web browser interface allows easy access and configuration
Supports DHCP or manual IP address allocation
Provides user and admin access passwords
2 Year warranty
The LINDY IPower Control 12 is an advanced power management solution which connects to your existing network infrastructure to provide convenient remote control power management of equipment. System administrators can now control the power to multiple servers, workstations, hubs, switches, routers etc. allowing reboot and power-on and off functions, via a simple to use browser interface.
IPower Control 12
12 x IEC C13 - C14 Power Cables
2 x UK Mains Cable
LINDY User manual
Firmware upgrade: Via Ethernet port
Network connection: RJ-45 10/100Mbps Ethernet Port
Power ports automatically return to previous state after re-booting
Measures total current and recent peak current (Time frame adjustable)
Large 4-digit LED display for current, peak current, ip address and temperature (Requires optional temperature probe)
1 x 6 Pin front mounted Mini Din female for optional temperature sensor
1 x 6 Pin front mounted Mini Din female for RS-232 control and AUX input for two passive inputs (Smoke detectors or door contacts)
Total switched power for one single port: max 2400W (10@240V)
Total switched power for all ports: Max 3120W (13A@240V) when using a UK three pin plug
Input: 2 x IEC C19 to Mains Plug, 2m (Fused 13A)
Output 12 x IEC Male to IEC Female, 3m
19" 1U rackmount design
Dimensions: 483 x 150 x 43mm (WxDxH)
Note: This unit has two IEC 320 C19 mains power input connector capable of operating from a 16A circuit. The supplied power cable is a standard Mains plug fused at 13A. If you intend to connect the unit to a 16A circuit then please ensure you use an appropriate "Commando" style plug to IEC 320 C19 power cable rated at 16A.
Write a review