For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
The switch for industrial applications, controls, cabinets, etc. with removable mount for DIN rail according to EN 50022 (35 x 7.5 mm). Power is supplied via a terminal block and can be duplicated for redundancy. The switch also allows potential free relay contact signal line (change-over contact).
8 RJ45 Ethernet ports for 10/100Base-Tx
IEEE 802.3u (100Base-Tx)
IEEE802.3x (Flow Control)
Internal memory for 1024 MAC addresses
Switching Method: Store and Forward
2 x Green: Power
Yellow: fault in power supply 1 or 2
8 x Green: Link / Activity
8 x Yellow: Full Duplex / Collision
Relay contact signal line for drop-loads up to 24V, 1A
two redundant power inputs for 12-48V DC
Power consumption: 3.5 Watt
Overvoltage and reverse polarity
Housing protection IP30
Storage temperature: -40 - 85 ° C
Operating temperature: -40 - 70 ° C
Relative humidity: 5% - 95% noncondensing
Dimensions (W x D x H): 26mm x 95mm x 144.3 mm
Write a review