Description
This product has been discontinued and replaced by Part No 25028.
This high performance managed SNMP switch provides users with 8 Gigabit Ethernet 10/100/1000Mbit/sec ports and 2 shared Mini GBIC ports. Its management function can be accessed via an out of band RS-232 terminal port connection and also via in-band IP access from a local or remote location.
This switch is suitable for enterprise companies or SOHO users who want to build up a high speed network or backbone. With single-mode or multi-mode fibre transceivers you can link remote users or share remote resources. A web interface management facility provides control capability over TCP/IP. This makes operation easy to manage with a browser at the local or remote side.
- Fully manageable network switching hub with access via RS-232 console port or IP
- 8 x 10/100/1000Base-TX RJ-45 Gigabit Ethernet ports, 2 are shared with the Mini GBIC ports
- 2 x Mini GBIC slots for Gigabit Ethernet LC fibre modules (LINDY Part No. 25011)
- Up to 8K MAC entries
- 144KB packet buffer
- 19" standard rackmount size (brackets included)
Technical details
This switch supports both port-based VLANs and 802.1q (tag-based) VLANs. To increase bandwidth application it supports port trunking with up to 8 ports. Non-blocking and maximum wire speed performance is supported on all switched ports. It also supports an auto-negotiation and Auto MDI/MDI-X function on all switched 10/100/1000 RJ-45 Gigabit ports.
Specifications:
- Standards: IEEE 802.3ab (1000Base-T), 802.3u (100Base-TX), 802.3 (10Base-T), 802.3x (Flow Control Support), 802.1q (VLAN)
- 8 x 10/100/1000Base-TX RJ-45 Gigabit Ethernet ports, 2 are shared with the Mini GBIC ports
- 2 x Mini GBIC slots for Gigabit Ethernet LC fibre modules (LINDY Part No. 25011)
- Auto negotiation support for each port
- Full/Half-duplex operation
- Up to 8K MAC entries
- 144KB packet buffer
- Supports port based and 802.1q (tag-based) VLANs
- Supports port trunking with up to 8 ports
- Non-blocking, full-line speed, store-and-forward technology
- Fully manageable switch with access via RS-232 console port or IP
- Built-in RS-232 serial port provides for initial configuration (RS-232 console cable included)
- Cable requirements: Gigabit requires RJ-45 STP/UTP twisted pair cable, CAT5e or higher
- LED indicators: Power, Speed & Link/Activity, Diagnostics
- 19" standard rackmount size (brackets included)
- Dimensions: 19" 1U, 252 x 135 x 44mm (WxDxH)