For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
The network time server acts as a stand-alone SNTP server.
All computers on its local network can synchronise its system time with the network at any time.
The time server itself is permanently synchronised via the long wave time signal sent by the DCF77 transmitter in Mainflingen, Germany. This signal is generated from one of the most precise atomic clocks in the world. It is controlled by the Physically-Technical Federal Institution in Brunswick, Germany and deviates by less than one second in 300,000 years. If the time signal reception is ever lost or in the event of a power cut, the time server will automatically take over the timing via an integrated battery-buffered Quartz clock, and automatically returns to DCF77 mode once the reception has been restored.
Your complete network will always have a highly accurate system time.
The time server is configured via an integrated Web interface, via Telnet over the serial RS-232 port or via the Windows-Software GBL_Conf software which can be downloaded from our server.
After switching the computer on, the active configuration will appear on-screen for a few seconds: afterwards the time and date appears.
Evaluation of time and date information is always based on the last 16 minutes.
Extensive plausibility checks are carried out.
This also guarantees successful evaluation when a completely fault-free time telegram cannot be received due to faults.
It also assures that the switch between summer and standard time takes place right away even when the reception is down. Comes with a high-quality long wave rod aerial.
The length of the aerial cable is 5m.
The technical features at a glance
Reception via DCF77 data and time within a radius of 2000 km from Frankfurt
Stand-alone NTP time server
Simple configuration via Web interface
A/D conversion and digital filter
Intelligent error correction
Battery-backed real-time clock
BNC connection for an active aerial
High-quality long wave rod aerial in delivery
LCD indicates date and time
Write a review