Allows you to split a single UHD source to 2 UHD displays
Supports video resolutions up to 4K2K@60Hz 8 Bit including 3D 1080p
Supports 7.1 channel of LPCM, Dolby TrueHD and DTS-HD Master Audio digital audio signals
HDCP 2.2 compliant for use with the latest AV equipment
2 year warranty
This state of the art 4K HDMI 2.0 18G splitter is capable of displaying resolutions up to 3840 x 2160 to one UHD signal in and to 2 UHD signals out. The splitter is also HDR (High Dynamic Range) compatible to reproduce a greater dynamic range of luminosity when used with imaging and photography.
With full support for HDCP 2.2 and HDMI 2.0, you can be sure that this product is fully future proof and ready for the new and demanding audio and video signals on the market.
The built in EDID switch panel allows you to select the resolution setting to avoid incompatibilities with different brands of monitors.
Duplicates a VGA signal from a PC to 2 VGA monitors, providing simultaneous viewing
Supports resolutions up to 2048x1536 (QXGA)
Cascadeable up to 3x for larger installations
Enhances the video signal up to 55m for longer distance broadcasting via cascading
2 Year Warranty
The Lindy 2 Port VGA Splitter is a professional solution for splitting PC video content across two separate VGA displays, with simultaneous playback.
Supporting resolutions up to 2048x1536, this splitter is perfect for engaging educational installations, eye catching digital signage or display testing that utilise legacy PC’s and monitors. This splitter is also cascadeable up to three layers, allowing for much larger display installations, all showing the same content from one VGA source device.
Please note: distances may vary on the quality of the cable used within the installation
Supports resolutions up to 4K 60Hz (3840 x 2160p @ 60Hz), HBR2 & MST Uncompressed
2 year warranty
The LINDY Fibre Optic DisplayPort Extender sends signals over MPO fibre optic cable with no loss of quality or signal degradation from compression artifacts or electromagnetic interference. This means it is highly suited to the demanding standards required for professional signal transmission in the medical, military and presentation industries.
Note: For indoor use only - in non-condensing humidity environments. You must use 12 Core 50/125µ MPO fibre optic cable with Method A termination (1:1)
1 x Fibre Optic DisplayPort Extender Unit
1 x Fibre Optic DisplayPort Receiver Unit
2 x Multi-Country Wall Mount Power Supplies with UK, Euro, US and AUS adapters
Colour Depths up to 48 Bit / 16 Bit per Channel, YUV 4:4:4
Dolby True HD, DTS-HD and Multi-channel audio support
HDCP 2.2 / 1.4 Pass-through
2 Year Warranty
The LINDY Fibre Optic HDMI 2.0 4K UHD Extender is the most cost effective, high performance solution on the market for sending HDMI 2.0 signals over incredible distances. Using a single OM3 MPO fibre optic cable (12 Core with "Method A" Termination) to make the long distance connection, the HDMI Extender provides full support for UHD 4K 60Hz Resolutions, 48 Bit deep colour, HDCP (2.2 &1.4 pass-through), multi-channel audio and CEC.
The extender system comprises two modules, a transmitter and a receiver, which are connected to both the HDMI source and display using standard HDMI cables of up to 2m. The modules are then connected together using a single, standard 'off the shelf' OM3 MPO fibre optic cable (12 Core with "Method A" Termination) of up to 200m in length (fibre optic cable is not included).
Creates a long distance connection between a DisplayPort source device and display
Supports high quality resolutions up to 4K 60hz
In-built active chipset for reliable longer length DisplayPort transmission
Bi-directional capability for more efficient, simpler installation
2 year warranty
Lindy’s Active DisplayPort 1.2 cables combine a sleek yet functional design with superior performance to provide a reliable DisplayPort transmission over distances not possible with standard passive DP cables. An active chipset, housed neatly in the centre of the cable, allows active cables to amplify DisplayPort signals effectively creating much longer DP transmissions. This creates long distance connections without the need for additional repeaters or extenders. Although many active DisplayPort cables are unidirectional and require connection to the source and display from a specific connector, these cables provide bi-directional capabilities, allowing for a simpler connection while avoiding potential compatibility issues. Combined with a stylishly designed headshell and high quality, flexible cable, these are an ideal solution for hassle-free installations through conduits or behind walls, to provide a more discreet and modern AV setup.
Featuring DisplayPort 1.2 cable technology, these cables are ideal for use with a variety of DisplayPort source device including PCs when connected to DP commercial displays and monitors. With support for resolutions up to 4k 60Hz, video content can be seen with stunning clarity, perfect for creating exciting retail displays, informational digital signage in transport buildings or engaging presentations in education, while 8-channel audio support allows for immersive audio to complement and enhance the viewer’s experience. Additional support for the REC.2020 colour space that covers the wider colour gamut required for high-dynamic range content, for better contrast and more lifelike colour, also provides an enhanced viewing experience.
Please note: This cable currently does not support daisy-chain functionality with Lenovo displays.
Creates a long distance HDMI connection between a 4K source device and display
Delivers reliable 4K@60Hz resolutions over longer cable distances
Active HDMI technology built into the connector for flexible installation
Full support for HEC, ARC and CEC compliant devices
2 year warranty
Lindy’s Active HDMI 18G cables combine sleek, modern design with superior performance to provide high quality, reliable HDMI transmission over long distances. Lindy's range of active cables come with an in-built chipset that amplifys the users signal to create a much longer HDMI transmission that isnt possible with standard passive HDMI cables, while also avoiding the need for additional expensive extenders or repeaters. With the active chipset built discreetly into the stylishly designed headshell, these cables can easily be installed through conduit or tighter spaces. These premium cables also support the full 18G HDMI bandwidth to display 4096x2160@60Hz resolutions with additional support for the REC.2020 colour space that covers the wider colour gamut required for high-dynamic range content, for enhanced contrast and more lifelike colour.
Complying to the HDMI 2.0 cable specification, these cables are ideal for use with a variety of source devices including set-top boxes, HDMI media players or PCs when connected to modern displays or projectors. Perfect for use in eye-catching retail displays, informational digital signage or immersive video playback in sports bars, music venues or high end home cinemas.
With support for a range of multi-channel audio formats, including Dolby® True HD and DTS-HD Master Audio, these cables also ensure an impressive three-dimensional surround sound performance when connected to an amplifier's speaker system. CEC functionality also allows many of the source device's settings to be controlled via the display or projectors controls to provide a simple and effective control solution, while avoiding the necessity for several remote controls.
Lindy's active cables should be connected in accordance with the instructions for the optimum experience. The connector marked “display” must be connected to the monitor or screen. Failure to connect the cable in the correct manner will result in no signal. Some projectors have recessed HDMI sockets, please ensure they can accommodate the connector used on this cable.
Active HDMI cables cannot be connected together or ‘daisy chained’.
HDMI hybrid cable combines the advantages of a fibre optic cable with a copper cable and transmits full 4K HDMI signals with absolutely no degradation
Supports resolutions up to Ultra HD 4K 4096 x 2160 @ 60Hz, including 1080p 3D
Supports Dolby® True HD, DTS-HD Master Audio up to 32 audio channels
Full support for CEC compliant devices
2 year warranty
Our Fibre Optic Hybrid HDMI cables are the perfect solution for easily extending HDMI digital signals over incredible distances. Perfect for professional and home cinema situations, they feature fibre-optic technology which allows transmission distances that far exceed the maximum supported by standard copper only cables.
These cables feature H-PCF (Hard-Polymer Clad Fibre) glass fibres for sending digital display signals. The transmitter and receiver modules are each equipped with standard HDMI Male connectors for connecting to the source and the display. The modules are connected together by a fibre and copper solution.
HDMI - The Standard for Connecting HDTV
All Digital No compression, no conversion, pure digital direct from the source as it was meant to be seen and heard.
The HDMI High Speed specification offers benefits over the previous version: 3D The HDMI specification defines common 3D formats and resolutions for HDMI-enabled devices. The specification will standardise the input/output portion of the home 3D system and will specify up to dual-stream 1080p resolution.
4K The HDMI specification will enable HDMI devices to support high-definition (HD) resolutions four times beyond the resolution of 1080p. Support for 4K will allow the HDMI interface to transmit content at the same resolution as many digital theatres.
Formats supported include: 3840 x 2160 @ 24Hz/25Hz/30Hz/60Hz 4096 x 2160 @ 24Hz
Content Type Content Type enables, automated picture setting selection with no user intervention. The Content Type feature enables a display to auto-detect the correct viewing mode to match the Content Type it is receiving from a source device, and to switch modes when a new connected source is selected. Content Type supports content profiles for gaming, movie, photograph and text viewing modes.
Audio Formats HDMI supports multi-channel digital audio on a single cable. It transmits all ATSC HDTV standards and supports 8-channel, 192kHz, uncompressed digital audio and all currently available compressed formats (such as Dolby Digital & DTS), HDMI 1.3 adds additional support for new lossless digital audio formats Dolby TrueHD and DTS-HD Master AudioTM with bandwidth to spare to accommodate future enhancements and requirements.
Amongst others the following formats are supported:
DTS-HD Master AudioTM
Dolby Digital / Plus
MPEG1 Layer I / II
DST / DSD (as used in SA-CD)
MLP (as used in DVD-Audio)
Expanded Support for Colour Spaces HDMI technology supports colour spaces designed specifically for digital still cameras. By supporting sYCC601, Adobe RGB and AdobeYCC601, HDMI-enabled display devices will be capable of reproducing more accurate life-like colours when connected to a digital still camera.
These cables are unidirectional and can only be used in one direction.
One end has TX and the other has RX. The TX must be in the source and the RX must be in the display or receiver.
Failure to follow the installation guide could result in the cable not working correctly.
Combines copper and fibre optic cable for a hybrid, long distance HDMI, Micro-HDMI & DVI connectivity solution
Supplied as a Micro-HDMI Male to Male cable, with detachable HDMI & DVI connectors
Supports HDMI 2.0 18G resolutions up to 4K@60Hz with additional support for HDR
Premium, metal connectors
2 year warranty
Lindy’s range of Fibre Optic Hybrid Micro-HDMI 2.0 18G Cables with detachable connectors are the professional solution for extending Micro-HDMI, HDMI & DVI signals over longer distances, with no requirement for additional adapters. Combining the flexibility and high EMI & RFI resistance of fibre optic cable with standard copper cabling, these hybrid cables are ideal for use in critical AV setups or commercial installations.
Supplied as a thin cable with a premium metal, narrow Micro-HDMI connector, this can be installed easily through conduit and other small spaces with no damage caused to the internal cable structure, while the detachable HDMI and DVI connectors can be added at the ends of the installation for connection to an even wider variety of displays and devices such as TVs, PCs or digital signage. This innovative design allows for a much wider range of connectivity solutions that can be customized freely by the user, including HDMI to DVI, HDMI to HDMI or DVI to a DVI display.
Supporting all the premium features that come with the HDMI 2.0 18G specification, these cables can deliver resolutions up to 4K at 60Hz, perfect for ensuring the best possible image quality in attention grabbing retail displays, immersive AV installations at events or a premium residential setup. HDR support ensures a much wider colour gamut, greater contrasts and an enhanced brightness to provide eye catching content even in outdoor or brightly lit scenarios.
Create a longer distance connection between a DisplayPort source and display
Copper and fibre optic hybrid construction for uncompressed signals and high EMI & RF resistance
Supports resolutions up to 4K@60Hz 4:4:4 10bit
DPCP support to ensure maximum compatibility
2 Year Warranty
Lindys range of Fibre Optic Hybrid DisplayPort cables are a high quality, advanced solution for creating longer length DisplayPort connections, not possible with standard copper only cables while also offering a lower cost alternative to fibre optic extender systems that can be directly connected to the source and display, with no requirement for additional cabling.
With a premium fibre and copper hybrid construction, signals are transmitted with no degradation, while also providing resistance to electro-magnetic and radio-frequency interference, perfect for integration into high noise environments including industrial or retail settings.
Support for resolutions up to 4K@60Hz and HDR ensures video can be viewed with flawless quality, enhanced brightness and a wider colour gamut, ideal for eye-catching digital signage in retail or engaging educational content in universities.
Combines copper and fibre optic cable for a hybrid, long distance Mini DP & DP connectivity solution
Supplied as a Mini DisplayPort Male to male cable, with detachable DisplayPort connectors
Supports DP 1.4 resolutions up to 8K@60Hz, 4K@120Hz with additional support for static and dynamic HDR
No external power required
2 year warranty
Lindy’s range of Fibre Optic Hybrid Mini DP 1.4 Cable with detachable connectors are the professional solution for extending both Mini DisplayPort and DisplayPort signals over longer distances, with no requirement for additional adapters. Combining the flexibility and high EMI & RFI resistance of fibre optic cable with standard copper cabling, these hybrid cables are ideal for use in critical AV setups or commercial installations.
Supplied as a thin cable with a premium metal, narrow Mini DisplayPort connector, this can be installed easily through conduit and other narrow spaces with no damage caused to the internal cable structure, while the detachable DisplayPort connector can be added at the ends of the installation for connection to an even wider variety of displays and devices such as PCs or digital signage. This innovative design allows for a much wider range of connectivity solutions that can be customized freely by the user, including Mini DP to Mini DP, DP to DP or Mini DP to a DP display.
Supporting all the premium features that come with the DP 1.4 specification, these cables can deliver resolutions up to 8K at 60Hz, or 4K at high frame rates of 120Hz, perfect for ensuring the best possible image quality in attention grabbing retail displays, immersive AV installations at events or a responsive, crystal-clear solution in transportation settings. Static and dynamic HDR support ensures a much wider colour gamut, greater contrasts and an enhanced brightness to provide eye-catching content even in outdoor or brightly lit scenarios.