The Lindy 45m DVI-D Dual Link Repeater can be used to extend high quality DVI digital signals up to distances of 45m, with no image degradation. This repeater supports a maximum resolution of 2560x1600@60Hz for high quality video playback.
Featuring a sleek compact design and a simple, efficient installation process, the repeater is ideal for use with professional AV/IT setups that require flexible longer length transmissions with no compromise on video performance. The female DVI-D ports are also perfect for connecting DVI source devices such as graphics cards to DVI displays and projectors.
An optional 5V DC PSU (2.5mm Inner/5.5mm outer diameter) can be used when the source device cannot supply a sufficiently high quality, DVI signal.
Extends an IR remote control system when used with a Lindy Fibre Optic Extender
Suitable for use with No. 38003/38004/38063/38163
Supports IR frequencies 36 - 56kHz
Cable Length: 1m (each unit)
2 Year Warranty
The IR Kit for Fibre Optic AV Extenders enables the extension of IR remote control signals alongside AV signals. The kit comprises of a Receiver and an Emitter which are then directly connected to the extender, and sited in a suitable location at either end of the installation using the adhesive pads on the base of each unit.
The LINDY Fibre Optic HDMI Extender is the most cost effective, high performance solution on the market for sending HDMI signals over incredible distances. Using a standard LC duplex single mode (9/125µ) fibre optic cable (not included) to make the long distance connection, the HDMI Extender provides full support for HD 1080p, HDCP, multi channel audio, CEC and infrared remote control.
If your video content does not include HDCP protection it is possible to use this extender to reach distances of up to 3km.
Unlike other manufacturer's solutions, the LINDY Fibre Optic HDMI Extender uses just one duplex fibre cable - no additional Ethernet patch cables are required for DDC or remote control.
HD 1080p, multi channel audio, HDCP, CEC and remote control over a single cable!
The extender system comprises two modules, a transmitter and a receiver, which are connected to both the HDMI source and display using standard of up to 5m. The modules are then connected together using a single, standard LC duplex single mode fibre cable of up to 700m (3km if without HDCP) in length (fibre optic cable is not included).
Extend DVI-D Dual Link signals up to 500m using a single fibre optic cable (not included)
Compatible with DVI-D 2.0 specifications including HDTV & HD-Ready displays
Supports HDTV resolutions up to 2560 x 1600 @ 60Hz / 1600p @ 60 Hz
Auto & Self learning EDID transmission
No HDCP support
Auto laser cut off if fibre optic cable is broken or DVI-D cable removed
2 year warranty
Easy to set up and install this compact Fibre Optic DVI-D Dual Link Extender is a cost effective, high quality solution for sending DVI-D signals up to 500m without any compression or degradation over MPO Multimode cable.
Unlike other solutions, this extender uses just a single fibre cable to reach such great lengths. The system comprises of transmitter and receiver modules that connect directly to the digital source & display via DVI-D. The modules are then connected using a single, MPO fibre optic cable (not included).
Please note - We recommend using 50/125µ or 62.5/125µ MPO multimode fibre cable. Please contact Technical Support for further advice.
Ideal for use with your iPod, iPhone, MP3 player or smartphone
Very lightweight - only 70g
High output 30mm neodymium drivers provide superb clarity and excellent bass response
On-ear design with breathable protein leather ear pads for maximum comfort and excellent sound isolation
Fully adjustable headband with swivelling earpieces for portability and convenience
1.2m cable with gold plated 3.5mm stereo jack
2 year warranty
LINDY HF-20 are the ideal choice for commuters as they offer a significant step up in quality over similarly priced in ear designs, whilst still being very lightweight (only 70g) for comfort and portability. The perfect choice for your iPod, smartphone or MP3 player!
These headphones have been specially designed with bespoke 30mm neodymium drivers to provide clear, high output in the mids and trebles as well as strong bass performance that doesn't overpower or muddy the sound in any way.
Reviewed in the August 2012 issue of Computer Active.
'...the headphones delivered crisp, pleasant sound.'
'...we were particularly impressed with the way they reproduced acoustic instruments.'
'Lightweight headphones that fold flat and sound good, too'