"This site uses cookies to provide and improve your shopping experience. By continuing to use this site, you agree to accept these cookies. For more information, please click here."
On board 4 Pin power connector to provide 12V DC power the FireWire bus (Y-type splitter power cable included)
Standard and Low Profile PC Back Plates included
TI chipset - ideal for music and pro audio applications
Software Compatibility: Windows Vista/2008 /7 /8 /8.1 /10 and Mac
This card is finished to a high standard to allow for easy and safe installation, and it is backed by the LINDY full technical support service.
The finger contacts are gold-plated to limit oxidisation and extend the life of the card. It features a Texas Instrument chipset which is recommended for music and digital audio applications.
Converts M.2 (NGFF) PCIe SDD for use in PCIe x4 slots
Supports PCIe Gen3 and Gen2 M.2 NGFF 110mm, 80mm, 60mm, 42mm form factors
Compatible with NVMe and SATA based SSDs
M.2 NGFF type 22110-D5-M connector on board
2 Year Warranty
The LINDY M.2 SSD to PCIe Adapter Card allows high performance PCIe based SSDs to be installed in a typical PCIe x4 slot commonly found on desktop PCs and servers. Using NVMe technology that was built specifically for SSDs allows super fast connection speeds. Supporting dual sided SSD modules with 1.5mm component height and a wide range of lengths allows most modules to be installed with ease.
Please note: SATA Based SSD Modules are not compatible with this adapter card. To boot from NVMe SSDs you will need appropriate BIOS support.
Features 2 external USB 3.1 Superspeed+ ports (2x Type A USB Female)
Supports USB 3.1, USB 3.0, USB 2.0, and USB 1.1 devices
15 pin SATA power connector for 5V USB from ATX power supply
Low Profile PCIe Form Factor (Regular size PCIe bracket with Low Profile PCIe bracket included)
Supported OS: Windows 8.1, 8, 7 (32bit /64bit), Vista, XP
2 year warranty
Easily add two additional 10Gbps USB 3.1 Type A ports to your computer with this 2 Port USB 3.1 Low Profile PCI Express Bus card.
Finished to a high standard, the card allows for an easy and safe upgrade installation with as few tools as possible. Each of the cards external ports are protected against short circuiting with a silicon fuse and gold-plated finger contacts limit oxidisation inside the computer helping extend the life of the card.
Package Contents:
1x 2 Port USB 3.1 PCIe Card with standard PC Back Plate
RAID Adapter for connecting two SATA Drives to a host computer
Supports SATA I (1.5Gbps) SATA II (3Gbps) SATA III (6Gbps), RAID 1, RAID 0, SPAN (Big Drive) and PM (2Drives) mode
Automatic "Rebuild" function, Native Command Queue (NCQ) and auto-negotiation
100% OS-transparent supports PC, Mac and Linux (driver not required for modern OS)
2 years warranty
The LINDY 6 Gbps Hardware RAID Adapter allows you to connect two SATA hard drives to a single host port. The drives can then be set up in a variety of RAID configurations via the adapter jumpers to appear individually or as a single drive.
Note: Changing the RAID mode will lead to a reconfiguration of the disk array, erasing all data on the hard drives. Where possible, it is advised you backup any critical data before performing this task.
Features 2 external USB 3.1 Generation 2 10Gbps SuperSpeed+ ports (2x Type C USB Female)
Supports USB 3.1, USB 3.0, USB 2.0, and USB 1.1 devices
5V 3A from each USB Type C port via 15 pin SATA power connector or PCIe bus
Low Profile PCIe Form Factor (Regular size PCIe bracket with Low Profile PCIe bracket included)
2 year warranty
Please Note: This card does not support Alternative DisplayPort Mode
Easily upgrade your computer with two external 10Gbps USB 3.1 Type C ports.
As well as supporting SuperSpeed+ data transfer rates of up to 10Gbps, twice that of USB 3.0's 5Gbps, this add-on card also features two reversible Type C ports.
Finished to a high standard, the card allows for an easy and safe upgrade to USB 3.1 requiring as few tools as possible. Each of the cards USB Type C ports are protected against short circuiting with a silicon fuse, while gold-plated finger contacts help limit oxidisation inside the computer extending the life and usefulness of the card.
Package Contents:
1x 2 Port USB 3.1 Type C PCIe Card with standard PC Back Plate
Compatible with Win XP, Vista, 7, 8, 8.1, 10, Server 2003, 2008, Linux
2 Year Warranty
The LINDY 1 port Serial PCI card can be installed in a spare PCI slot to provide a RS-232 9pin serial port. Ideal for POS, Modems, GPS receivers, equipment configuration and more.
Finished to a high standard, the card allows for an easy and safe upgrade, requiring as few tools as possible. Gold-plated finger contacts help limit oxidisation inside the computer extending the life and usefulness of the card.
