For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
This product has been discontinued and replaced by Part No 41072.
Supports high-bandwidth, uncompressed digital video, multi-channel digital audio and control
HDMI Full HD 1080p and HEC compatible
HDMI 2.0 compliant, supporting Ultra HD up to 4K 3840x2160p@60hz, including 1080p 3D
For connecting longer lengths up to 45m use with LINDY Premium Gold HDMI Cables
2 year warranty
Please note: Some projectors have recessed HDMI sockets.
You should make sure they can accommodate the connector used on this cable.
The connector dimensions are 19 x 38 x 11mm (WxDxH)
High Speed HDMI Active Cables cannot be connected together or 'daisy chained'
HDMI - The Standard for Connecting HDTV
No compression, no conversion, pure digital direct from the source as it was meant to be seen and heard
All of your HD video and audio in one cable
Say goodbye to cable clutter
One HDMI cable can replace up to 8 audio and 5 video cables
The new HDMI High Speed specification offers benefits over the previous version:
HDMI Ethernet Channel (HEC)
The High Speed HDMI HEC Cable specification has an additional data channel that enables high speed bidirectional communication.
Connected devices that include this feature will be able to send and receive data via 100mb/sec ethernet, making them instantly ready for any IP based application.
It will also allow internet enabled HDMI devices to share their internet connection with other HDMI devices without the need for a separate ethernet cable.
This new feature will also provide the connection platform to allow HDMI enabled devices to share content between devices.
Audio Return Channel (ARC)
The new specification will add an Audio Return Channel that will reduce the number of cables required to deliver audio upstream for processing and playback.
In cases where HDTV's are directly receiving audio and video content, this new Audio Return Channel allows the HDTV to send the audio stream to the A/V receiver over the HDMI cable, eliminating the need for an extra cable.
The new specification will define common 3D formats and resolutions for HDMI-enabled devices.
The specification will standardise the input/output portion of the home 3D system and will specify up to dual-stream 1080p resolution.
The new specification will enable HDMI devices to support high-definition (HD) resolutions four times beyond the resolution of 1080p.
Support for 4K will allow the HDMI interface to transmit content at the same resolution as many digital theatres.
Formats supported include:
3840 x 2160 @ 24Hz/25Hz/30Hz
4096 x 2160 @ 24Hz
Content Type enables, automated picture setting selection with no user intervention.
The Content Type feature enables a display to auto-detect the correct viewing mode to match the Content Type it is receiving from a source device, and to switch modes when a new contect cource is selected.
Content Type supports content profiles for gaming, movie, photograph and text viewing modes.
HDMI supports multi channel digital audio on a single cable.
It transmits all ATSC HDTV standards and supports 8-channel, 192kHz, uncompressed digital audio and all currently available compressed formats (such as Dolby Digital & DTS), HDMI 1.3 adds additional suopport for new lossless digital audio formats Dolby TrueHD and DTS-HD Master AudioTM with bandwidth to spare to accomodate future enhancements and requirements.
The following formats are supported:
DTS-HD Master AudioTM
Dolby Digital / Plus
MPEG1 Layer I / II
DST / DSD (as used in SA-CD)
MLP (as used in DVD-Audio)
Expanded Support for Colour Spaces
HDMI technology now supports colour spaces designed specifically for digital still cameras.
By supporting sYCC601, Adobe RGB and AdobeYCC601, HDMI-enabled display devices will be capable of reproducing more accurate life-like colors when connected to a digital still camera.
Connectors: HDMI Male/Male, Type A
Gold plated contacts
HDCP 2.2 compliant
Supports 3D resolutions at 1080p & 4K 3840x2160p@60hz 4:2:0
Supports up to 48 bit colour
Triple Shielding eliminates RF and EM interference
Maximum connector dimension: 19 x 38 x 11mm (WxDxH)