• Extends HDMI 4K (3840x2160p60Hz 4:2:0) or VGA (max 1920x1200) Video signals over a Gigabit IP network
• Supports point to point installation up to 100m (393ft) and point to multipoint installation using a Gigabit Switch (also for Video Wall creation)
• Extends USB 2.0, USB HID (for KVM functions), bidirectional analog audio, bidirectional IR and RS232 signals
• HDMI 2.0 & HDCP 2.2/1.4 compliant
• 2 year warranty

The 4K Over IP Extender system allows users to extend a 4K video source such as a PC or PVR through a standard Gigabit IP network letting the user control it from the remote side through the extended USB interfaces. This receiver unit can be connected to a transmitter unit (No. 38266 – not included) to create a standard point to point control system with a maximum distance of 100m (393ft). The transmitter can also be connected to many receivers, allowing a single device to be controlled from different consoles at the receiver end or creating a Video Wall installation via a dedicated Gigabit Ethernet (supporting 8kB Jumbo frames) switch on the same private network.

With the PoE function it is also possible to power the unit without a PSU.

Besides the HDMI embedded audio signal, this unit also manages 2 additional audio channels (1 x Line out audio from the source side and 1 for microphone connected on the remote side) and a SPDIF optical port on the receiver unit to connect a digital audio amplifier or device.

This HDMI Over IP extender system includes a convenient bidirectional IR (20-60Khz) repeating system to allow the extension of the remote control signals.

This device is a typical solution for security system management (PVR management or control rooms) or remote server administration (though the KVM control system) as well as AV signals over IP extension for distributed monitoring of industrial facilities. Another main application for this system is big Video Wall installation (up to 16x16 screens) widely used for digital signage and retail stores.

• Controls both matrix and TV wall configurations using WebGUI presets
• Definable display groups to simplify large installations
• WebGUI provides the complete status of all connected transmitters (No.38266) and receivers (No.38267), including IP address, channel selection and video preview.
• Supports point-to-point (unicast) and multi-to-multi (multicast) routing selections
• 2 year warranty

This Video Over IP controller enable a fast and reliable control system for 4K Over IP Extender installations. This unit provides a single interface to manage large installations including video walls with the option to create groups to simplify the control tasks. It's also possible to connect an HDMI monitor (max resolution 1080p) directly to this processor. A USB mouse can also be connected to the processor to control the interface without using a PC. Device management is controlled by a web based visual interface with signal preview making setup of the installation fast and intuitive. The convenient POE gigabit interface allows users to install the unit without connecting the included PSU.

Please note: this unit works only when connected to a Gigabit network where several extender transmitter units (No.38266) and receiver units (No.38267) are connected.