Extends DVI-D video signals up to 50m using low cost CAT5e/5 Cable (not included)
Supports resolutions from 800x600 up to 1920x1200 including 1080p
Power consumption: 1.6W (5V 320mA)
HDCP not suported
2 year warranty
Please note: picture is for illustration purposes only. Network cable is not included.
With this Extender you can use up to 70m of high quality inexpensive Cat.5e/6 cable to connect a DVI source to a DVI display device.
The slim RJ45 connectors and Cat.6 cable (not included) allow greater flexibility not possible with larger DVI connectors and cables.
Normal operation will not require external power; however the Transmitter unit allows external power to be attached in cases where the graphics card does not provide sufficient power, either using a USB Micro-B Cable or an external power supply (5V 320mA) connected to the supplied USB to DC cable.
The Extender supports the following resolutions/distance combinations
800x600 up to 70m
1024x768 up to 65m
1280x1024 to 1920x1200 up to 50m
RJ-45 patch cable: 1 x CAT5e/6 UTP Cable
Transmitter and Receiver Units
USB Micro-B Male to DC (5.5/2.5mm Outer/Inner) Female Adapter Cable, Overall length 12cm
Extend and Distribute 4 HDMI sources up to 50m* to 4 HDMI Displays
Each Output features simultaneous output to HDMI (local) & Cat.6 (Remote)
Supports resolutions up to 1080p including 1080p 3D & Features support for bi-directional IR signals (20 - 60kHz)
Controlled via IR Remote, Push Button, RS-232 or TCP/IP
2 Year Warranty
The Lindy HDMI & IR Cat.6 Extender 4x4 Matrix supports the transmission of high definition video (resolutions up to 1080p Full HD and 1920×1200@60Hz, including 1080p 3D*), multi-channel digital audio and control via push button, IR, RS-232 and TCP/IP from four high definition sources to four remote displays over a single Cat.6 cable of up to 50m for each output.
Each of the 4 outputs is also simultaneously mirrored on local HDMI output ports, perfect for monitoring outputs or for the creation of a secondary local zone.
It supports high resolution digital audio formats such as LPCM 7.1 CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio as well as 3D content that can be displayed when connecting a 3DTV and 3D source.
This flexible feature rich product has been designed to be used in a number of different appliCat.ions, such as:
- Domestic HDMI Matrix system
- Video/TV wall display and control
- Security surveillance and control
- Commercial advertising, display and control
- University Lecture hall display and control
- Retail Sales and demonstration
*Please Note: The quoted lengths and resolutions are possible with a direct connection between Transmitter and Receiver using good quality Cat.6 solid core cable. Using a different cable type, or introducing wall plates, couplers or patch panels will result in a reduction of possible distances.
Extends HDMI 1.4 & IR Signals up to 50m* using a single Cat.6 Cable
Supports resolutions up to Full HD 1080p, including 3D
Features a loop-through HDMI output on the Transmitter for local monitoring
Supports power over Cat.6, only a single power supply is required
2 Year Warranty
The HDMI & IR Cat.6 Extender is a simple to use plug and play solution which lets you extend an HDMI AV signal up to 50m using a single low cost Cat.6 UUTP cable (not included). For added convenience IR signals (20-60 kHz) can also be extended using the supplied IR Receiver and Emitter cables. Supporting resolutions up to Full HD 1080p, including 1080p 3D, the Extender is designed for use in AV and digital signage appliCat.ions in a variety of settings such as home, eduCat.ion, business, retail and healthcareThe Extender features an HDMI loop-through output on the Transmitter with simultaneous viewing so that a local display can be connected for monitoring or to create an additional viewing zone. To ensure the maximum compatibility when two displays are connected the EDID data, which determines the supported video and audio formats, can be used from either a local monitor connected to the Transmitter or the remote monitor connected to the Receiver.
Power over Cat.6 (PoC) functionality enables the Extender to operate from a single power supply connected to the Transmitter, allowing the Receiver to be loCat.ed where there is limited access to mains power sockets making it ideal for retro fit installations. In addition to PoC functionality the Extenders slim design makes it easier to install in limited spaces behind modern flat screen displays.
Maximum resolution supported: 1920x1200@60Hz or 1600x1200@60Hz
The receiver delivers a MONO Audio signal (Stereo left and right channels are combined by the transmitter unit)
Gain and Peak regulation dimmers on the receiver unit to improve quality over longer distances
2 year warranty
This VGA Extender transmits VGA and audio signals through CAT5e network cables over distances of up to 300m when using high-quality solid core network cable.
Easy to install, the Extender system is made up of local transmitter and remote receiver units that are connected together with CAT5e cable (not included), high quality solid core installation cable is recommended. The local transmitter unit connects to the computer system's VGA port, with a VGA output available to connect a local monitor, while the receiver unit connects to your remote monitor or projector.
The extender includes both Gain and Skew controls to allow you to adjust the brightness and sharpness of the picture according to your requirement.
Both Extender units are housed in sturdy metal casings, making them ideally suited to use in factories and other industrial applications.
Maximum supported distances and resolutions are dependent on both the monitor and the chipset used in the graphics card.
To get the best video quality results on the longest distance a skew compensator like our item number 32766 may be required
VGA & Audio CAT5e Extender with Audio Transmitter
VGA & Audio CAT5e Extender with Audio Receiver
2x Multi-country PSU 5V ~2A (with 3.5/1.35mm DC connector)
An advanced Splitter Extender that extends and distributes HDMI & IR signals to 4 displays at distances of up to 50m
Supports resolutions up to Full HD 1920x1080 @60Hz 4:4:4 8bit, including 3D
Features a loop-through HDMI output on the transmitter for local monitoring/cascading
Supports power over Cat.6 (PoC), only a single power supply is required for operation
2 year warranty
The Lindy 50m Cat.6 4 Port HDMI & IR Splitter Extender is a simple to use plug and play solution that allows users to extend an HDMI signal up to 50m and then distribute that signal to four displays using low cost Cat.6 UUTP cable (not included). For added convenience IR signals (20-60kHz) can also be extended using the supplied IR receiver and emitter cables.
Supporting resolutions up to 1920x1080, including 1080p 3D, the Splitter Extender is designed for use in AV and digital signage appliCat.ions for a variety of settings such as home, eduCat.ion, business, retail and healthcare.
An integrated HDMI loop-through output on the transmitter unit enables simultaneous viewing so that a local display can be connected for monitoring, or to create an additional viewing zone. For larger installations, the HDMI loop-through port can also be used to cascade up to 3 transmitters allowing up to 12 displays to be connected to a single source.
The HDMI loop-through port also allows the Splitter Extender to clone the EDID of a connected display. An integrated EDID emulation system provides 9 EDID presets for ultimate compatibility with a variety of EDID enabled devices.
Power over Cat.6 (PoC) functionality provides power for the complete installation using only a single power supply connected to the transmitter - a perfect solution for retro fit installations where receivers may be loCat.ed away from a mains power supply. The power supply is connected via a screw type DC jack, providing a secure and reliable connection, ideal for installations where accidental disconnections could occur. For added convenience the Splitter Extender’s slim design and integrated mounting brackets make it easy to install in limited spaces behind modern flat screen displays.