Extends uncompressed HDMI or DVI-D signals up to 100m via low cost Cat. 6 network cable
Supports HDTV resolutions up to 4K @ 30Hz with 24/36/48 bit colour depth
Supports 4K 3840 x 2160p24, and 3D (including 1080p 3D)
Supports LPCM, DTS Digital, DTS HD, Dolby Digital & Dolby True HD audio
Allows the remote control of equipment via CEC or IR extension up to 100m
Simple plug and play installation
2 Year Warranty
Perfect for home cinema or professional AV installations, the HDBaseT Extender is capable of extending Full HD 1080p, including 3D up to 100m using a single Cat. 5e/6/7 cable. The HDBaseT Extender is also able to extend infrared signals, allowing AV equipment to be controlled up to 100m away. An integrated Ethernet hub also allows you to conveniently connect PC/MAC, NAS and other network equipment over the same single Cat. 5e/6/7 cable.
- Integrated 2 port 10/100 ethernet hubs in both the transmitter and receiver unit
- Frequency range 33-50kHz
- HDBaseT Alliance 5Play
HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
Extends HDMI 2.0 18G signals up to 300m over a single duplex LC cable
Supports resolutions up to 4K 60Hz Ultra HD, with High Dynamic Range
Bi-directional IR or RS-232 for seamless, flexible control
HDCP 2.2 support to ensure maximum compatibility
2 year warranty
The Lindy 300m Fibre Optic HDMI & IR Extender is a high performance solution for extending 4K 60Hz Ultra HD transmissions over incredible distances, which are not possible with traditional copper based systems, using a single standard LC duplex multimode (50/125µm) fibre optic cable.
Support for the HDMI 2.0 specification allows for the transmission of highly detailed 4K Ultra HD resolutions, using smart methods of compression, which decompresses the signal at the receiver for a visually lossless picture. Also providing support for High-Dynamic Range, video content can be seen with enhanced brightness, greater contrasts and a much wider colour gamut, perfect for creating eye-catching digital signage in retail, impressive residential installations or taking sports venue distribution to new immersive levels. HDCP 2.2 compatibility also means that protected 4K content including movies and TV shows can be viewed without issue.
As opposed to the use of copper based extension systems, the use of fibre optic cable also ensures immunity to RF and EMI, providing a stable signal in ‘noisy’ retail or industrial environments which can have a high interference from electronics. This extender can also be used as part of a longer length distribution system by simply replacing the supplied with Multi-mode SFP+ module with a single-mode SFP module.
With the ability to extend signals up to 300m the extender provides huge installation flexibility, the transmitter can be easily connected to a variety of HDMI source devices such as Blu-Ray players, 4K HDR media players or PC's in a convenient location, while the receiver can be placed in a suitable viewing area along with a 4K display or projector. The included mounting brackets also allow for a neat installation under desks or discreetly hidden behind displays. In addition, the power supply is connected via a screw type DC jack, providing a more secure and reliable connection, perfect for professional installations where accidental disconnections could create a major issue.
Featuring bi-directional IR and RS-232 ports, the extender provides the capability for source equipment to be seamlessly controlled from the display side, and the display can also be controlled from the HDMI source device, great for providing simple, flexible control over the installation for the user. Alternatively, when IR is not used, support for RS-232 enables the extension of control signals as part of a larger installation.
Extends HDMI signals at distances of up to 300m using a single fibre optic cable (not included)
Supports resolutions up to Ultra HD 4K 60Hz 4:2:0 8 bit, including 1080p 3D
10.2 Gbps Total Bandwidth over Single 2-core Fibre Optic Cable Link
Supports lossless HDMI audio formats including Dolby True HD and DTS-HD
2 year warranty
Easy to set up and install the compact, simple to use Lindy LC Fibre Optic HDMI Extender is the most cost effective, high quality solution on the market for sending HDMI signals over incredible distances. USB powered it sends HDMI signals without compression or any degradation up to 300m over standard OM3 LC duplex multimode (50/125µm) fibre cable (not included).
The extender system comprises of two modules, a transmitter and a receiver, which are connected directly to both the HDMI source and display. The modules are then connected together using a single, standard 'off the shelf' LC fibre optic cable (not included).
Please note: This extender supports DisplayPort 1.1 up to 4K30 / 3840x2160 @ 30Hz using the Lindy adapters No.41068 (at the source) and No.38146 (at the monitor).
An advanced Splitter Extender that extends and distributes HDMI & IR signals to 4 displays at distances of up to 50m
Supports resolutions up to Full HD 1920x1080 @60Hz 4:4:4 8bit, including 3D
Features a loop-through HDMI output on the transmitter for local monitoring/cascading
Supports power over Cat.6 (PoC), only a single power supply is required for operation
2 year warranty
The Lindy 50m Cat.6 4 Port HDMI & IR Splitter Extender is a simple to use plug and play solution that allows users to extend an HDMI signal up to 50m and then distribute that signal to four displays using low cost Cat.6 UUTP cable (not included). For added convenience IR signals (20-60kHz) can also be extended using the supplied IR receiver and emitter cables.
Supporting resolutions up to 1920x1080, including 1080p 3D, the Splitter Extender is designed for use in AV and digital signage appliCat.ions for a variety of settings such as home, eduCat.ion, business, retail and healthcare.
An integrated HDMI loop-through output on the transmitter unit enables simultaneous viewing so that a local display can be connected for monitoring, or to create an additional viewing zone. For larger installations, the HDMI loop-through port can also be used to cascade up to 3 transmitters allowing up to 12 displays to be connected to a single source.
The HDMI loop-through port also allows the Splitter Extender to clone the EDID of a connected display. An integrated EDID emulation system provides 9 EDID presets for ultimate compatibility with a variety of EDID enabled devices.
Power over Cat.6 (PoC) functionality provides power for the complete installation using only a single power supply connected to the transmitter - a perfect solution for retro fit installations where receivers may be loCat.ed away from a mains power supply. The power supply is connected via a screw type DC jack, providing a secure and reliable connection, ideal for installations where accidental disconnections could occur. For added convenience the Splitter Extender’s slim design and integrated mounting brackets make it easy to install in limited spaces behind modern flat screen displays.