For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
Extend DVI-D Dual Link signals up to 500m using a single fibre optic cable (not included)
Compatible with DVI-D 2.0 specifications including HDTV & HD-Ready displays
Supports HDTV resolutions up to 2560 x 1600 @ 60Hz / 1600p @ 60 Hz
Auto & Self learning EDID transmission
No HDCP support
Auto laser cut off if fibre optic cable is broken or DVI-D cable removed
2 year warranty
Easy to set up and install this compact Fibre Optic DVI-D Dual Link Extender is a cost effective, high quality solution for sending DVI-D signals up to 500m without any compression or degradation over MPO Multimode cable.
Unlike other solutions, this extender uses just a single fibre cable to reach such great lengths. The system comprises of transmitter and receiver modules that connect directly to the digital source & display via DVI-D. The modules are then connected using a single, MPO fibre optic cable (not included).
Please note - We recommend using 50/125µ or 62.5/125µ MPO multimode fibre cable. Please contact Technical Support for further advice.
1 x Transmitter Unit
1 x Receiver Unit
2 x multi country 5V 1A power supplies
AV Interface: DVI-D
Interface Standard: DVI-D 2.0 (Dual Link)
Supported Bandwidth: 9.9 Gbps
Maximum Distance: 500m (1640.4ft)
Maximum Resolution: 2560x1600@60Hz
HDCP Support: -
EDID Pass Through: -
Supported Audio: -
Separate Audio Ports: -
IR Support: -
CEC Support: -
Serial Interface: -
Transmission Protocol: -
Transmission Medium: 1 x MPO
Laser Class (only for Fibre): 1
Wavelength (only for Fibre): 850nm
Special Features: Self-EDID learning
Transmitter Input: DVI-D (Male)
Transmitter Output: MPO (Female)
Receiver Input: MPO (Female)
Receiver Ouput: DVI-D (Male)
Bidirectonal Ports: -
Power: 3.5/1.35mm DC socket
Dimensions WxDxH: 40x70x15mm (1.57x2.76x0.59in) per unit
Housing Material: Metal
Net Weight: 0.1kg (0.22lb) per unit
Operating Temperature: 0°C - 50°C (32°F - 122°F)
Storage Temperature: -20°C - 65°C (-4°F - 149°F)
Humidity: 10 - 75% RH (non-condensing)
Power Requirements: 5VDC <150mA (TX) / 5VDC 250mA (RX)