For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
The LINDY Fibre Optic DVI-D Extender is the most high performance solution on the market for sending DVI-D signals over incredible distances.
Using a standard SC duplex single mode (9/125*Remote control requires our Infrared Kit (sold separately)) fibre optic cable (not included) to make the long distance connection, the DVI-D Extender provides full support for computer DVI-D Single Link and HDTV DVI-D signals, RS-232 and IR remote control.
Unlike other manufacturer's solutions, the LINDY Fibre Optic DVI-D Extender uses just one duplex fibre cable - no additional cables are required for RS-232 or IR remote control.
DVI-D, RS-232 and IR remote control over a single cable!
The extender system comprises two modules, a transmitter and a receiver, which are connected to both the DVI-D source and display using standard DVI-D cables of up to 5m. The modules are then connected together using a single, standard SC duplex single mode fibre cable of up to 5km in length (fibre optic cable is not included)
1 x Transmitter Unit
1 x Receiver Unit
2 x multi-country PSU, 5VDC, 2.6A
8 x rubber feet (if not installed)
AV Interface: DVI-D
Interface Standard: DVI-D 2.0 (Dual Link)
Supported Bandwidth: 4.95 Gbps
Maximum Distance: 5000m (16404ft)
Maximum Resolution: 1920x1200@60Hz
HDCP Support: HDCP 1.1
EDID Pass Through: -
Supported Audio: -
Separate Audio Ports: -
IR Support: 36-56kHz
CEC Support: -
Serial Interface: RS232
Transmission Protocol: -
Transmission Medium: 1 x Duplex SC (50/125µm)
Laser Class (only for Fibre): 1
Wavelength (only for Fibre): 850/1310/1450/1550nm
Special Features: Auto Laser Disabling Function
Transmitter Input: DVI-D (Female), IR (Female)
Transmitter Output: Duplex SC
Receiver Input: Duplex SC
Receiver Ouput: DVI-D (Female), IR (Female)
Bidirectonal Ports: RS232
Power: 5.5/2.1mm DC socket
Dimensions WxDxH: 162x120x30mm (6.38x4.72x1.18in) per unit