For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
Supports uncompressed DisplayPort signals up to 4K
Supports the extension of up to four USB 2.0 devices*
Uses a single MPO/MTP Fibre Optic cable
2 Year Warranty
Designed for highly demanding use cases the DisplayPort 1.2 & USB 2.0 KVM Extender is capable of supporting DisplayPort 1.2 resolutions up to Ultra HD 4K (7680x4320) at distances of up to 200m using a single MPO/MTP cable (OM3 12 Core Method A 1:1). Using fibre optic technology the Extender is capable of extending these Ultra HD video signals in real time without compression over long distances whilst also extending four USB 2.0 devices* such as a keyboard, mouse and USB drive. The Transmitter and Receiver units are electronically isolated from one another removing the risk of damage via ground loop.
* Please Note: Isochronous USB devices such as Webcams and Audio interfaces are not supported.
Fibre Optic DisplayPort 1.2 & USB 2.0 KVM Extender (1 x Transmitter, 1 x Receiver)
2 x 5V 3A Multi-Country (EURO, UK, US & AUS) Power Supply
Supports DP 1.2 and has enough bandwidth for resolutions up to 3840x2160
Supports highest DP resolutions and MST (multi-monitor operation via MST hubs), but not DP ++, conversion to other interfaces only via active converters (Eyefinity, Surround, Collage)
Supports HBR2, bandwidth up to 5.4Gbps per lane, 21.6 Gbps total
Uncompressed transmission of the monitor signals in real-time without any loss of quality
USB 2.0 features
Supports except isochronous almost all USB 2.0 devices
When connecting isochronous webcams and audio adapters, incompatibilities can occur until the USB function is aborted
Data transfer rates up to 11 Mbyte / s. total, approximately 1/4 the maximum USB 2.0 data rate
Supports USB hubs and other devices
MPO / MTP Fibre Optic Link & Features:
Laser Class 1 product with 0.5mW output power and automatic laser cut-off with retracted or broken MPO cable
Automatic shutdown of the optical transmitters when the input signals are switched off
For use with 12-core MPO cables OM3 1:1 - Note see below
Dimensions approx. 18 x 12 x 3 cm each, TX and RX without MPO cable
Weight approx. 0.6kg each, TX and RX, without accessories
Total weight approx. 1.7kg incl
Temperature range Operation: -10 ° C to 50 ° C, storage -20 ° C to 75 ° C
For indoor use in well ventilated locations
Current consumption approx. 0.5A / 2.5W (transmitter), approx. 0.8A / 4W (receiver) plus connected USB devices
An MPO / MTP OM3 cable (1: 1 by Method A) to the required length to 200m
Keep the glass fibre plugs and sockets dust-free! Keep the dust caps on.
Avoid high tensile or other forces on the glass fibre cables!
Never bend the fibre-optic cable less than the permitted minimum bending radius, approx. 10cm - for details, see manufacturer's instructions!