For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
WLAN Antenna adapter cable for use with WLAN Routers, Modems and Access Points!
DO you want to place your WLAN antenna in a distance from your WLAN box? Or do you want to use a different WLAN antenna?
If the cable of your WLAN box antenna is fixed to the antenna (i.e. for several famous WLAN boxes like some FritzBox 7050 series) you will require this internal adapter cable to mount it into your WLAN box.
Please check in advance if your WLAN box has the appropriate mini BNC connectors! This adapter cable is designed for use with any external WLAN antennas with RP-SMA connector. It is availbale from 15cm to 3m.
High frequency coax cable, 50 Ohms, RoHS compatible FEP, diameter 1.13mm
Inner conductor: AWG32/7 (7*0.08mm)
Shielding braid coverage 90%, 16*2*0.05mm
Mini HF BNC plug 90° angled, connects to the WLAN module with appropriate Mini BNC receptacle (the width of the plug is approx. 3mm, the height approx. 2mm)
RP-SMA female recaptacle, for housing mount with nut and washer
Every high frequency cable (WLAN, 2.4GHz) attenuates the WLAN signal acording to the cable length and to the frequency:
Longer cables should always be used with external amplifying antennas. You can find them on the LINDY website under Networking / WLAN & Bluetooth