Extends USB 3.1 Gen1 (5Gbps) / USB 3.0 connections up to a maximum length of 400m
Uses standard LC multimode duplex fibre optic cables
Plug and play, no drivers required
Supports all major operating systems with USB 3.1 Gen1 or USB 3.0
2 year warranty
The LINDY USB 3.0 Fibre Optic Extender supports far longer distances than standard copper cables, using standard "off the shelf" LC duplex fibre, whilst retaining SuperSpeed transfer rates of up to 5Gbps. The Extender is a two part hardware solution comprising of a transmitter that connects directly to your computer and receiver that connects to the USB peripheral. Since the Extender uses fibre optic cable this rules out the possibility of any electrical interference on the extended signal.
Ideal for remote desktop links, industrial control, surveillance and external storage applications the extender gives long distance access to many devices.
The chart below is an example of the achievable distances using the different grades of fibre:
62.5/125µm OM1 : 100m
50/125µm OM2 : 200m
50/125µm OM3 : 400m
Please Note: This product is not backwards compatible with USB 2.0/1.1/1.0
USB Extender Transmitter and Receiver Units
When using older Operating Systems like Windows 7, please install the latest drivers and firmware of your USB 3.0 Host controller.
Also available as a version which supports MS Kinect and high compatibility with cameras. If you are interested, please contact: firstname.lastname@example.org
The LINDY USB 3.1 M.2 SSD Enclosure allows you to use an M.2 SSD as a portable external drive at USB 3.1 10Gbps speeds, whilst utilising the new Type C connector allows easy insertion as well as SuperSpeed+ data transfer.
Easy to install, the enclosure is bus powered so requires no external power supply and is compatible with Windows, Mac and Linux.
1 x USB 3.1 M.2 SSD Enclosure with USB Micro-B Female connector
Requires DisplayPort Alternate Support by the USB 3.1 Port/Bus
Compatible with Thunderbolt 3
Supports resolutions up to UHD 4K 3840x2160p 30Hz
Supports up to 60W (20V 3A) of USB Power delivery (External power supply required)
2 Year Warranty
The LINDY USB 3.1 Type-C to HDMI Adapter Convertor allows you to quickly add external video capabilities to devices featuring the USB 3.1 Type-C port with support for DisplayPort Alternate Mode. USB Power delivery of up to 60W (20V 3A maximum) allows you to power your notebook or ultrabook via it's USB Type C port whilst simultaneously using it as a video output. Simply connect a compatible USB power supply to the VGA Adapter using a USB Type A/C or Type C/C cable.
Installation is simple as no drivers are required and the Type-C's reversible design means that you do not have to pay attention to which way the cable is inserted into the port.
Connects a SATA hard drive to your computer's USB 3.1 Gen 1 port
Supports SATA 6Gbps and USB 3.1 Gen 1 - 5Gbps
Tool Free Installation
Integrated USB 3.1 Gen 1 Hub
2 Year Warranty
The LINDY USB 3.1 SATA Enclosure turns a normal 2.5-inch SATA hard drive (HDD) or solid state drive (SSD) into a portable, external hard drive. It supports data transfer rates up to 5Gbps via USB 3.1 Gen 1, and is backward compatible with USB 3.0 and 2.0 systems.
Compact and lightweight, the enclosure is highly portable, ideal for mobile applications or temporary desktop backup & storage. It has a tool free design, for easy drive installation.
Dual Bay Aluminium design accepts either 2.5" or 3.5" SATA disk drives
Backwards compatible with USB 3.0 and 2.0
2 Year Warranty
The LINDY USB 3.1 Gen 2 Docking and clone station is ideal for system builders/integrators, computer technicians and IT departments. As well as acting as an external drive caddy for 2.5" and 3.5" SATA hard disks it is also a convenient cloning station. It easily makes bit by bit clones (including Operating System and Partitions) of the source disk onto the target disk, making it perfect for upgrading to larger capacity HDD or SSDs!
The docking functionality allows connections via USB 3.1 (10Gbps). Data recovery and backups are done without the hassle of installation. The dual bay design allows two hard drives to be connected simultaneously, so that data can be copied between multiple drives of different types as 2.5" and 3.5" SATA drives are supported natively.
Connect two independent DisplayPort monitors to a single Thunderbolt 3 port
Supports resolutions up to Ultra HD 4K 60Hz on 2 monitors or Ultra HD 5K 60Hz on a single monitor
Thunderbolt 3 and DisplayPort 1.2 compliant
Plug & Play, Bus powered solution
2 Year Warranty
The Thunderbolt 3 to Dual DisplayPort 1.2 Adapter uses a single Type C port to attach two Ultra HD 4K DisplayPort monitors or a single Ultra HD 5K DisplayPort monitor (uses two DisplayPort connections), giving you a simple way to experience an Ultra HD resolution desktop environment.
Designed for Notebook/Ultrabook users the adapter creates the ability to have two independent monitors connected. This provides the user with the flexibility to configure the layout of the displays into Extended or Mirrored Desktop modes, making it suitable for almost any application.
In addition, support for Ultra HD resolutions up to 4K (4096x2160p) at 60 Hz on both of the connected displays, the adapter is perfect for the most demanding graphic use cases, such as design, video editing, medical and CAD applications.
An Ultra HD 5K (5120x2880p) resolution can be achieved on a single monitor using both DisplayPort connections at the same time with compatible monitors such as the Dell UltraSharp 27 (UP2715K).
Thunderbolt 3 to Dual DisplayPort 1.2 Converter Adapter
Your computer’s Thunderbolt 3 ports might not function properly until you update one or more of the following on your computer:
Thunderbolt 3 controller drivers
Thunderbolt 3 software
The required updates will vary depending on your computer.
10 x USB Type A Ports with up to 2.4A charging per port
11 Adjustable separators allows different widths for different tablet/mobile phone sizes
Smart charging function adjusts the charge current
Protects against overvoltage, overloading and short circuits
2 Year Warranty
The LINDY 10 port USB charging Station allows you to charge up to 10 tablets, phones or other mobile devices at the same time.
Each port can provide up to 5V 2.4A to satisfy the most hungry power devices.
With the intelligent hibernation technology, supply power automatically will be placed in sleep mode to save power.
Supports BC1.2 Charging Protocol as well as Apple Charging Protocol and can also recognize charging devices intelligently and automatically adjusting charging power to sustain battery life as well as satisfying the charging needs of various devices simultaneously.
Plastic dividers can be assembled and stood on the top of the unit, this allows different widths for different tablet/mobile phone sizes.
This product is perfect for use in schools, libraries, hotels, restaurants or any location that uses multiple tablets on a daily basis.
USB charging station
11 plastic separators
12V 8A PSU with 4 country specific power cables for EU/US/UK and AUS