For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
Extends USB peripherals up to 50m via CAT5 or higher cable
USB 1.1 compatible
USB 2.0 devices can also be connected, but with Full Speed 12Mbps support only
Simple Plug & Play installation
Local unit connects directly to your computer
Remote unit features a built-in 4 port USB 1.1 hub to connect your peripherals
Compatible with all major USB enabled operating systems
Optional power supply available for use with devices that require more than 250mA of current from the USB bus
Local unit: Type A USB Male (with 35cm cable), RJ-45 Female
Remote unit: 4 x Type A USB Female, RJ-45 Female, DC jack socket (2.5/5.5mm diameter)
Dimensions (each unit): 100 x 70 x 23mm (WxDxH)
This useful device allows you to extend the distance between your USB Peripherals and your computer by up to 50m, using inexpensive CAT5 or higher cable.
It comprises a local unit, which must connected directly (not via a hub) to a USB port on your computer, and a remote unit with a built-in bus-powered USB 1.1 hub for connecting up to 4 peripherals. CAT5 or higher network patch cable (not included) is required to connect the two units together.
Please note: Standard can be used with this product but is not included and must be purchased separately. We supply suitable CAT5e and 6 cable in different lengths and colours.
Connecting additional USB hubs
Further USB hubs can also be connected but the maximum cable distance is reduced by 10m for each hub. An optional power supply has to be connected to the hub, for self-powered operation, as soon as the connected devices require more than 250mA of current from the USB bus.