The USB 2.0 SATA Docking Station You can insert SATA hard drives with 22-pin SATA combi connection directly into the USB 2.0 SATA docking station and to your PC via USB 2.0 interface! Simply insert the hard drive into the slot above - no complicated installation into a hard drive housing necessary!
For connecting 2.5" or 3.5" SATA hard drives and SSDs - does not support any hard drives > 2.2 TB
Hot Swappable – On/Off switch on the docking station
Including "Multi-Country" power supply unit and USB 2.0 cable
Standalone cloning functionality, no computer required
Full bitwise cloning including MBR and EISA partitions
Dual Bay design accepts either 2.5" or 3.5" SATA disk drives
USB 3.0 SuperSpeed 5Gbps Interface - Compatible with USB 3.0 equipped PCs and Macs
2 year warranty
This handy cloning station is ideal for system builders/integrators, computer technicians and IT departments.
As well as acting as an external hard drive for 2.5" and 3.5" SATA hard disks it is also a convenient cloning station. It easily makes bit by bit clones (including Operating System and Partitions) of source HDDs onto target HDDs making it perfect for upgrading to larger capacity HDDs!
The docking functionality allows bare HDDs to be connected to a computer via a USB 3.0 SuperSpeed interface (5Gbps). Data recovery and backups are done without the hassle of installation. The dual bay design allows two hard drives to be connected simultaneously, so that data can be copied between multiple drives of different types as 2.5" and 3.5" SATA drives are supported natively.
connect hard drives to a PC without using an external housing.
You can also clone one drive to three other drives bit by bit – without a PC. Later, you can boot from the cloned-to drive instead of the original one
2.5" and 3.5" SATA hard drives are simply plugged into the 22-pin SATA combination connector in the docking station. Hard drives and SSDs with a 16-pin Micro SATA connection can be connected using the Micro SATA adapter Art. No. 33502. ** see below
A fast USB 3.0 super-speed or eSATA interface is used for the connection to your PC.
Connects 2 SATA HDD/SSDs to a computer using a single connector
USB 3.0 SuperSpeed 5Gbps Interface
Accepts 1.8/2.5/3.5” HDD/SSDs with 22 pin SATA combo interface - for Micro SATA please use LINDY 33502.
Features auto-spin down after being idle for 5 minutes
Compatible with USB 3.0 equipped computers (Software support for Windows only)
2 year warranty
The LINDY USB 3.0 Docking and Clone Station Premium can be used as both a dual SATA docking station and standalone cloning station that creates a bit-by-bit clone of the source drive onto a target Drive.
The Docking & Clone Station also provides additional features for Windows computers following the installation of the included software. The software can be activated upto a maximum of 5 times.
A Software Clone function allows you to choose if you use an external or internal hard drive as the cloning source for the target hard drive. It is also possible to clone from bigger to smaller hard drives, with software that resizes the partition accordingly.
Additionally, a Flash Copy function allows cloning to be carried out twice as fast as other USB 3.0 Cloning Stations. While a Disk Erase function allows you to completely delete the data on the hard drive safely, securely and permanently.
Please Note - A completely full, large source hard drive cannot be copied to a smaller target drive.
For software installation an active internet connection during installation and activation is necessary.
USB 3.0 HDD Docking and Clone Station Premium
USB 3.0 Type A to Type B connecting cable, 90cm
12V 3A w/ Euro or UK External power supply with a 1m DC cable and 5.5/2.1mm barrel connector
Software CD for offline cloning and Flash Copy for USB 2.0 (Windows Only)
USB 3.1 Gen2 SuperSpeed+ up to 10Gbps (backwards compatible with USB 3.0, 2.0 and 1.1)
Features the USB Type C connector
Suitable for 2.5" and 3.5" SATA III HDDs/SSDs* and 5.25" ODD drives
Compatible with Thunderbolt 3
Compliant to SATA 3.2 Specification (1.5Gbps, 3Gbps and 6Gbps)
2 year warranty
The LINDY USB 3.1 to SATA Adapter allows you to quickly backup or restore your data using SuperSpeed+ transfer rates of up to 10Gbps. The unit allows drives to be inserted directly, saving time by not using an external enclosure.
Perfect for IT technicians, SoHo (Small Office, Home Office) and home users.
* Please Note: This product does not directly support 3.3V HDD / SSD. To use drives which require 3.3V please use our SATA / Micro SATA Adapter.
Dual Bay Aluminium design accepts either 2.5" or 3.5" SATA disk drives
Backwards compatible with USB 3.0 and 2.0
2 Year Warranty
The LINDY USB 3.1 Gen 2 Docking and clone station is ideal for system builders/integrators, computer technicians and IT departments. As well as acting as an external drive caddy for 2.5" and 3.5" SATA hard disks it is also a convenient cloning station. It easily makes bit by bit clones (including Operating System and Partitions) of the source disk onto the target disk, making it perfect for upgrading to larger capacity HDD or SSDs!
The docking functionality allows connections via USB 3.1 (10Gbps). Data recovery and backups are done without the hassle of installation. The dual bay design allows two hard drives to be connected simultaneously, so that data can be copied between multiple drives of different types as 2.5" and 3.5" SATA drives are supported natively.
Connect an HDMI display, 3 USB devices and Gigabit LAN to your Tablet/Ultrabook
Conveniently attaches to your Tablet/Ultrabook using a stretching arm design
Supports resolutions up to 4K Ultra HD 30Hz via mini DisplayPort to HDMI conversion
Integrated 3 Port USB 3.1 Gen 1 SuperSpeed 5Gbps hub
2 Year Warranty
With its unique stretching arm design the Tablet and Ultrabook docking station connects directly to your Tablet/Ultrabook, helping to reduce desk clutter whilst giving you access to a variety of common office devices. You can securely attach the Docking Station to the Kick Stand of a Surface Pro 2/3/4 or to the screen bezel of an Ultrabook (max width 32cm, depth 2.7mm).
The Tablet and Ultrabook docking station has been developed to provide simple, convenient access to the most commonly used interfaces, providing access to a 3 port USB hub and Gigabit LAN via its integrated USB 3.1 Type A Cable.
The docking station can also accept a mini DisplayPort video input which is converted to a HDMI output which is capable of resolutions of up to 4K Ultra HD (3840x2160p 30Hz), making it easy to connect to a HDMI monitor.
For added convenience a 5V power supply (not included) may be attached to provide power when using USB peripherals with high power requirements.