For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
The LINDY USB 3.1 M.2 SSD Enclosure allows you to use an M.2 SSD as a portable external drive at USB 3.1 10Gbps speeds, whilst utilising the new Type C connector allows easy insertion as well as SuperSpeed+ data transfer.
Easy to install, the enclosure is bus powered so requires no external power supply and is compatible with Windows, Mac and Linux.
1 x USB 3.1 M.2 SSD Enclosure with USB Micro-B Female connector
1 x USB 3.1 Type-C to Micro-B cable, 40cm
1 x Screwdriver
1 x Screws and Nut for enclosure and SSD
USB 3.1 Gen 2 (10 Gbps) standard
Supports SATA 1.5 / 3 / 6Gbps M.2 SATA SSDs
Suitable for SATA-based SSDs M.2
Supports M.2 module Type 2280 (80mm), 2260 (60mm), 2242 (42mm) and 2230 (30mm) with Key B and "double-sided" M.2 SSD modules in 1.23 mm height (top and bottom )